In this study, the pressure drop for the binary mixtures of particles differing in size and density in a pseudo-2D spouted bed was experimentally studied. A binary mixture of solid particles including sand, Gypsum, and polyurethane was used in the experimental setup. Effects of static bed height, cone angle, particles diameter, and a particles weight fraction on the bed pressure drop were e...

After impact onto a smooth dry surface, a drop of viscous liquid initially spreads in the form of a thick lamella. If the drop splashes, it first emits a thin fluid sheet that can ultimately break up into droplets causing the splash. Ambient gas is crucial for creating this thin sheet. The time for sheet ejection, t{ejt}, depends on impact velocity, liquid viscosity, gas pressure, and molecular...

Two models of heparin coated, hollow fiber membrane oxygenators were tested in vitro to compare gas transfer and transoxygenator pressure drop using an established protocol. Oxygen and carbon dioxide transfer rates were measured at blood flows of 2.5 and 5.0 liters per minute with gas flow: blood flow ratios of 1:1 and 2:1 at both blood flows. All testing was performed under normothermic condit...

Natural gas hydrate (NGH) concentrations hold large reserves of relatively pure unconventional natural gases, consisting mainly of methane. Depressurization is emerging as the optimum conversion technology for converting NGH in its reservoir to its constituent water and natural gas. NGH concentrations commonly have a pore fill of over 80%, which means that NGH is a low-permeability reservoir, a...

electrospinning is a method of nanofiber filter media production. by this method, it is possibleto produce media with nanofiber in the range of nanometer to micrometer. nanofibrous media provide a large specific surface area in a finite volume thus they are suitable for filtration applications. in this study, nanofiber non-woven membranes production of nylon-6 by electrospinning method is inves...

We investigate here how the surrounding gas influence the dynamics of drop impacts on a thin liquid film. We describe in details the entrapment of the gas bubble using numerical simulations with high enough mesh resolution. The bubble entrapment comes from viscous effect in the thin gas layer that need to be evacuated down the drop, creating a high pressure field that deforms the drop interface...

Fluid transport through microporous carbon-based materials is inherent in numerous applications, ranging from gas separation by carbon molecular sieves to natural gas production from coal seams and gas shales. The present study investigates the steady-state permeation of supercritical methane in response to a constant cross-membrane pressure drop. We performed dual control volume grand canonica...

This paper reports the development of microfluidic oxygenator (MFO) units designed for a lung assist device (LAD) for newborn infants. This device will be connected to the umbilical vessels like the natural placenta and provide gas exchange. The extracorporeal blood flow is only driven by the pressure difference between the umbilical artery and vein without the use of external pumps. The LAD is...