Microand nano-hierarchical structures (lamellae, setae, branches, and spatulae) on the toe pads of many animals play key roles for generating strong but reversible adhesion for locomotion. The hierarchical structure possesses significantly reduced, effective elastic modulus (Eeff), as compared to the inherent elastic modulus (Einh) of the corresponding biological material (and therefore contrib...

Abstract Mixed matrix membranes (MMMs) have been widely developed as an attractive solution to overcome the drawbacks found in most polymer membranes, such permeability-selectivity trade-off and low physicochemical stability. Numerous fillers based on inorganic, organic, hybrid materials with various structures including porous or nonporous, two-dimensional three-dimensional, used. Demanded fur...

Hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. SEVA/HAP composite content HAP filler with difference particle sizes were designed. Mechanical tests like tensile modulus, UTS, strain at break and biodegradation were investigated. Results illustrated much increase tensile modulus of composites content HAP nano powders ratio to micro powders. Also UTS analysis ...

We explored the use of a hybrid filler consisting of graphite nanoplatelets (GNPs) and single walled carbon nanotubes (SWCNTs) in a polyamide 6 (PA 6) matrix. The composites containing PA 6, powdered GNP, and SWCNT were melt-processed and the effect of filler content in the single filler and hybrid filler systems on the thermal conductivity of the composites was examined. The thermal diffusivit...

This paper presents a two-dimensional computational model of micro-structured cathodic electrodes featuring nano-porous gas diffusion media that increase the surface to volume ratio of the deposited catalyst layer. A key objective of the modeling effort is to elucidate the Knudsen diffusion within the nano-porous electrode. In addition, the model is non-isothermal and resolves the natural conve...

In this paper, the high purity bisphenol-A diglycidyl ether (DGEBA) epoxy resin (D.E.R 332), which is mainly used as filament winding, electrical laminates and encapsulation applications, was used as a host. The epoxy resins were loaded with nano-SiO2 and nano-BN in different loading concentrations, and then test of the AC/DC breakdown strength has been performed. It has been observed that the ...

Our paper reviews the use of conductive polymer composite materials in various applications for semi conductive, static-dissipative, anti-corrosive, electromagnetic interference (EMI) shielding and stealth composite coatings. The composite consists of conductive fillers and the insulating polymer network. The composite becomes electrically conductive as the filler content exceeds a certain crit...

Porous bone tissue engineering scaffolds were fabricated using both nano hydroxyapatite (nano HA) powder (20 nm average particle size) and micro HA powder (10 microm average particle size), resulting in sintered scaffolds of 59 vol% porosity and 8.6 +/- 1.9 microm average grain size and 72 vol% porosity and 588 +/- 55nm average grain size, respectively. Scanning electron microscopy was used to ...

An advanced SiO2–lignin hybrid material was obtained and tested as a novel poly(vinyl chloride) (PVC) filler. The processing of compounds of poly(vinyl chloride) in the form of a dry blend with silica–lignin hybrid material and, separately, with the two components from which that material was prepared, was performed in a Brabender mixing chamber. An analysis was made of processing (mass melt fl...

Single crystals in nature often demonstrate fascinating intricate porous morphologies rather than classical faceted surfaces. We attempt to grow such crystals, drawing inspiration from biogenic porous single crystals. Here we show that nanoporous single crystals of gold can be grown with no need for any elaborate fabrication steps. These crystals are found to grow following solidification of a ...