PURPOSE This paper is focused on the works concerning preparation of zirconium oxide ceramic blocks recommended for CAD/CAM systems used in prosthetic dentistry for manufacturing fixed prosthetic restorations. METHODS Zirconium-yttrium-magnesium mixed ceramic oxides were prepared by sol-gel method via hydrolysis and condensation of zirconium alkoxide precursor (zirconium (IV) propoxide) with ...

In this study, the elemental powders of aluminum and copper were initially subjected to mechanical alloying using an attrition ball mill under argon atmosphere to produce an Al-4.5 wt% Cu powder alloy. The WC nanoparticles were then added to the powder alloy and milled in a planetary ball mill to explore the role of the WC nanoparticles on the mechanical properties of the fabricated composite p...

A combination of the high damage tolerance of TRIP-steel and the extremely low thermal conductivity of partially stabilized zirconia (PSZ) can provide controlled thermal-mechanical properties to sandwich-shaped composite specimens comprising these materials. Sintering the (TRIP-steel-PSZ)/PSZ sandwich in a single step is very difficult due to differences in the sintering temperature and densifi...

The Si-coated SiC (Si-SiC) composite nanoparticle was prepared by non-transferred arc thermal plasma processing of solid-state synthesized SiC powder and was used as a sintering additive for SiC ceramic formation. Sintered SiC pellet was prepared by spark plasma sintering (SPS) process, and the effect of nano-sized Si-SiC composite particles on the sintering behavior of micron-sized SiC powder ...

novel ceramic oxides have been increasingly focused in recent years because of their potentialapplications in environmental purification especially to treat organic contaminants present in water. in thisresearch work, a set of nio-co3o4 nano-ceramic composite materials were prepared by a simple refluxcondensation method using nickel acetate / cobalt acetate as precursor salts, sodium monododecy...

The morphology of structuring and composition forming the ceramic-metal composite material (cermet) TiC/Al is shown in obtaining it using a new method with spontaneous infiltration aluminum melt into porous ceramic frame titanium carbide TiC synthesized combustion mode initial mixture powders (charge) Ti+C, i.e. process self-propagating high-temperature synthesis (SHS).

Interest in nanocrystaJline ceramic powders is due to their attractive processing and mechanical properties. The disadvantages of conventional ceramics, such as large internal flaws, negligible ductility, hightemperature processing, can possibly be eliminated or minimized by starting with finegrained powders. A previous study on the sinterability of nanocrystalline ceramic powders showed that h...

Oxide dispersion strengthened (ODS) alloys have been under intensive development over the past four decades due to their excellent high-temperature creep strength and good oxidation resistance. Nickel-based ODS alloys are the combination of gamma prime (γ’) strengthened superalloy with yttrium oxide evenly distributed throughout the matrix to allow the strength to be maintained to much higher t...

Nickel chromium (NiCr) powders with different titanium diboride (TiB2) additions (20, 40 and 60 wt %) were prepared with a mechanical alloying method and then sprayed using an air plasma spraying technology. The microstructure and phase composite of the powders and the cross-sections of deposited coatings were analyzed with a scanning electronic microscope and X-ray diffraction. The tribologica...