composite concrete-steel plate shear walls are the most critical resisting structural members that resist lateral and axial loads. This type of wall consisting of two steel faceplates presenting the outer skin, infill concrete and shear connectors which are used to provide the composite action of the steel faceplates with infill concrete in order to increase the strength and to reduce the local...

In this study, an addition of Ag micro-particles (8–10 lm) with a content in the range between 0 and 1.5 wt.% to Sn–9Zn eutectic solder, were examined in order to understand the effect of Ag additions as the particulate reinforcement on the microstructural and mechanical properties as well as the thermal behavior of the newly developed composite solders. Here, an approach to prepare a micro-com...

In this paper, a Green’s function is developed for bending analysis of micro plates under an asymmetric load. In order to consider the length scale effect, the modified couple stress theory is used. This theory can accurately predict the behavior of micro structures. A thin micro plate is considered and therefore the classical plate theory is utilized. The size dependent governing equilibrium e...

In the implementation of Carbon Nanotube Reinforced Polymer matrix Composites in structural applications, deflection and stress analysis are important considerations. In the present study, a multi scale analysis of deflection and stress analysis of carbon nanotube (CNT) reinforced polymer composite plates is presented. A micromechanics model based on the Mori-Tanaka method is developed by intro...

In this study we report a new concept of printing low-cost two-dimensional micro-zone plates for chemical and biochemical assays and ELISA. It is different from the concept of forming multi-zone micro-zones on paper by hydrophobic barriers first reported by Yagoda. Instead, the desired multi-zone micro-zone pattern was first printed using a UV-curable varnish onto a polymer film; then fine powd...

It has been documented that AE signals propagate in thin plates as extensional and flexural plate modes. This was demonstrated using simulated AE sources (pencil lead breaks) by Gorman [1] on thin aluminum and gr/ep composite plates and by Gorman and Prosser [2] on thin aluminum plates. A typical signal from a pencil lead break source which identifies these two modes is shown in Figure 1. AE si...

Composite materials have been used extensively in various applications, such as mechanical engineering, aerospace engineering, and aviation thanks to their interesting mechanical properties. However, a substantial drawback in the use of such composite materials is that they absorb a significant amount of moisture when exposed to severe hygrothermal conditions. This factor dramatically affects t...

In this study, enamel micro-cracks produced around composite restorations were observed on surfaces and vertical sections, using a stereomicroscope and a scanning electron microscope (SEM). The effects of various clinical factors, i.e. the curing system, the marginal form and the polishing period after filling, on the incidence of marginal enamel micro-cracks were examined. Enamel micro-cracks ...

A finite element model is constructed to analyze the steady heat conduction and thermal stress in a ceramic/FGM/metal composite EFBF plate under convective heat transfer boundary. From numerical calculation, when 1   b a   , T0=Ta =300K and Tb=1 800K, the steady heat conduction and thermal stress distributions in the plate were obtained. The numerical results show that the temperature distr...

As a new alternative design, plate-reinforced composite (PRC) coupling beam achieves enhanced strength and ductility by embedding a vertical steel plate into a conventionally reinforced concrete (RC) coupling beam. Based on a nonlinear finite element model developed in the authors' previous study, a parametric study presented in this paper has been carried out to investigate the influence of se...