The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...

manufacturing process frequently employs optimization of machining parameters in order to improve product quality as well as to enhance productivity. the material removal rate is a significant indicator of the productivity and cost efficiency of the process. taguchi method has been implemented for assessing favorable (optimal) machining condition during the machining of nylon by considering thr...

The abrasion mechanism in solid-solid contact mode of the chemical mechanical polishing (CMP) process is investigated in detail. Based on assumptions of plastic contact over wafer-abrasive and pad-abrasive interfaces, the normal distribution of abrasive size and an assumed periodic roughness of pad surface, a novel model is developed for material removal in CMP. The basic model is = removed, wh...

It has been shown that micromachining of polyimide using a mode-locked high repetition rate, 80 MHz, 355nm laser is more efficient than the q-switched laser at same wavelength and same power level in terms of material removal rate. In this study we have explored and characterized the benefits of using high repetition rate, high average power, 355 nm mode-locked and q-switched lasers for microma...

Through a systematic experimental investigation into the polishing of polycrystalline diamond composites by the dynamic friction technique, this paper identified three major regimes of polishing conditions: the regime capable of a low material removal, that enabling a safe, high removal processing, and that of an unsafe but ultra-high material removal. The study concluded that a higher polishin...

Electrochemical machining (ECM) is a non-traditional machining process used mainly to cut hard or difficult to cut metals, where the application of a more traditional process is not convenient. It offers several special advantages including higher machining rate, better precision and control, and a wider range of materials that can be machined. A suitable selection of machining parameters for t...

Electric Discharge Machining is a non-conventional machining process, used to machining difficult to machine materials. The major problem faced while doing EDM is high tool wear rate, end wear, corner wear , surface roughness and low material removal rate,. In this research work experimental investigations have been made to find the machining characteristics of high density ultra fine graphite ...

Polymer composites materials are used in a variety of engineering applications as substitute to metal-based products, and they now have wide range technical uses. Epoxy resin resole the most thermoset polymer matrix ,that good mechanical, electrical, thermal characteristics after curing .In this study, machinability epoxy reinforced with different weight fraction nanoparticles was estimated dur...