In this paper an attempt is made to evaluate the convective mass transfer coefficient during drying of jaggery in a controlled environment. In this method, different masses of jaggery were used. The jaggery was dried in the roof type even span greenhouse with a floor area of 1.2x0.8 m in natural and forced convection mode at atmospheric pressure till it attained almost no variation in mass. The...

Mathematical models play an essential role in simulation of dynamic processes as they provide insights into the description and behaviour of real systems. Models of chemical processes are derived from laws of conservation, thermodynamic, and control design. In the present paper, we study the modelling of dissolution process determining the quasi steady state material balance for velocity profil...

The potential bioconversion of synthesis gas (syngas) to fuels and chemicals by microbial cell has attracted considerable attention in past decade. The feasibility of enhancing syngas bioconversion to ethanol and acetate using Clostridium ljungdahlii in a continuous tank bioreactor (CSTBR), kinetics and mass transfer coefficient of carbon monoxide (CO) utilization were evaluated. Two different ...

Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...

The saponification of an aromatic ester with an aqueous sodium hydroxide was studied within a heterogeneous reaction medium in order to determine the overall kinetics of the selected system. The extended thermo-kinetic model was developed compared to the previously used simple one. The reaction rate within a heterogeneous liquid-liquid system incorporates a chemical kinetics term as well as mas...

The single-phase flow and thermal performance of a double pipe heat exchanger are examined by experimental methods. The working fluid is water at atmospheric pressure. Temperature measurements at the inlet and outlet of the two streams and also at an intermediate point half way between the inlet and outlet is made, using copper-constantan thermocouple wires. Mass flow rates for each stream are ...

Accidental spillages or leakages of organic compound within the environment, released as non-aqueous phase liquid (NAPL), result a widespread contamination of subsurface soils and groundwater. In such multi-phase flow system in porous media, interphase mass transfer mainly governs the overall transport processes that occur in the interface between the two fluid phases. Air-liquid interfacial ar...