The construction industry is the largest consumer of natural resources which led to depletion of good quality natural sand (Fine aggregates). This situation led us to explore alternative materials and granular slag a waste industrial byproduct is one such material identified for utilization it as replacement of natural sand. This paper highlights upon the feasibility study for the utilization o...

One of the parameters that has been identified as influencing the structural response of buildings is the dynamic Modulus of Elasticity of masonry units. The first aim of this paper is to experimentally investigate the use of high frequency sinusoidal loading to determine the dynamic Modulus of Elasticity of masonry units. The Longitudinal Vibration and the Ultrasonic Pulse methods were origina...

Basically, all masonry units are suitable for tests. Randomly sample 5 masonry units for determining the moisture content. Additionally, for tests with no preload, randomly sample a further 15 masonry units for the construction of the specimens and, for tests with preload, randomly sample a further 15 masonry units per preload value for the construction of the specimens. A minimum of 3 preload ...

In recent years, even if Fiber Reinforced Polymer (FRP) composites have been widely used for strengthening of civil buildings, a new generation of materials has been studied and proposed for historical masonry construction. These buildings, mainly made of stone work, are common in many areas of Europe and Asia and recent earthquakes has been the cause of many catastrophic failures. The brittlen...

Abstract The paper presents the results of experimental testing six masonry rings built to technical scale and strengthened with CFRP strips sheets also an FRCM system PBO, glass, basalt carbon fibers. were subjected tensile loads induced by four hydraulic jacks. assumption is that are a representative simplification domes, especially their structural support. Both single layered domes ribbed e...

Water content affects mortar and masonry properties however, it is often determined by the mason assessing mortar workability. This can lead to lack of consistency and variable masonry performance. This paper investigates the compressive, flexural and bond strength and stiffness of brick masonry bound with natural hydraulic limes (NHL2, 3.5 and 5), hydrated lime (calcium limeCL90s) and cement-l...

Brick is one of the most common masonry units as a building material due to its properties. Many attempts have been made to incorporate wastes into the production of bricks, for examples, rubber, limestone dust, wood sawdust, processed waste tea, fly ash, polystyrene and sludge. Recycling such wastes by incorporating them into building materials is a practical solution for pollution problem. Th...

This work reports the outcomes of an extensive experimental campaign on the retrofitting of masonry walls by means of carbon fiber reinforced polymer (CFRP) sheets, carried out at University of Applied Sciences (UAS) Fribourg. In the first stage, static-cyclic shear tests were conducted on the masonry walls, followed by a second stage of tensile tests on alternative configurations of mechanical...