Metallographic, X-ray diffraction and magnetometric analysis were used to study the regularities of martensitic transformation in melt-spun ribbons of a Fe - 28 wt. % Ni - 2.1 wt. % Ti - 2 wt. % Al - 0.05 wt. % C alloy. The substantial differences in volume fractions of the martensite phase in local regions of thin melt-spun ribbons of the alloy are related to the size effect of the transformat...

The tribological behavior of dual-phase steels have been studied at the macroscopic scale taking macrohardness as main material property to control friction and wear. However, contribution varying properties phase microscopic are yet be fully understood. In this study, microstructures with various grain sizes martensite volume fraction generated. Microhardness ferrite measured by nanoindentatio...

The non-linear nature of the superelastic phase transformation in NiTi means that conventional fatigue life theory is difficult to apply. The volume fraction of martensite/parent phase and its role in the fatigue mechanism is not understood. This paper considers the fatigue life of superelastic NiTi alloys when tested at 2Hz in Ringers solution. In agreement with other researchers [1] [2] it wa...

l13Cd NMR measurements in two Ag-Cd samples cycled between room temperature and temperatures below M, are presented. The growth curve of the martensite on cooling presents a discontinuity in the cycling temperature region. It is shown that the method of analysis of the NMR data recently developed by us [Phys.Rev.B 46, 10563 (1992)], allows to detect subtle memory effects and the absolute determ...

A quantitative and automated phase analysis of dual-phase (DP) steel using electron backscatter diffraction (EBSD) was attempted. A ferrite-martensite DP microstructure was produced by intercritical annealing and quenching. An EBSD map of the microstructure was obtained and post-processed for phase discrimination. Band slope (BS), which was a measure of pattern quality, exhibited much stronger ...

The possibility to obtain multiphase steels with considerable fractions of retained austenite, which is of key interest for the occurrence of the TRIP effect, is investigated in steels with low amounts of Si and Al. Special emphasis is dedicated to the microstructural observation of this phase, since its volume fraction, distribution and stability, related to the carbon content, will determine ...

in this article cuo/water nanofluid was synthesized by using polyvinylpyrolidone (pvp) as the dispersant.  thenanofluid stability period and the heat transfer enhancement were determinedby measuring the thermal conductivities. to study the nano-fluid stability, zeta (ζ) potential, and absorbency were measured under different ph values and pvp surfactant concentrations; also thermal conductivity...

The features of martensite transformation in Fe (31 32)% Ni melt-quenched alloys are considered. The meltquenching was realized by spinning technique with variable parameters. The influence of the melt-quenching on structural and kinetics transformation parameters is revealed. In particular Ms point is shown to decrease but volume percentage of athermal martensite is found to be invariable with...