The formation of stress-induced martensite in superelastic NiTi was studied by neutron diffraction during uniaxial compressive loading and unloading. The respective phase fractions were determined as a function of the applied stresses using a Rietveld refinement with a March–Dollase texture formulation. Before loading, the specimen was fully austenitic. At the highest applied stress of 2625 MPa...

This paper describes an experimental study of stress-induced martensitic phase transformation in the SMA Nickel-Titanium. The rich local thermo-mechanical interactions that underlie transformation are examined using three-dimensional Digital Image Correlation (strain fields) and infrared imaging (thermal fields). We quantify the complex local interactions between released/absorbed latent heat a...

A significant variant selection is reported in isothermal martensite formed on the surface of an Fe-30% Ni sample. The selection phenomenon is modelled using different descriptions of the martensitic phase transformation. In particular, matrices based on the phenomenological theory of martensite crystallography, the Jaswon and Wheeler distortion, and the continuous face centred cubic-body centr...

In order to discuss the advent of the magnetic-field-induced strains for a single crystal Fe22:0Ni51:5Ga26:5 shape memory alloy, the magnetic easy axis in the 14M martensite phase and the magnetocrystalline anisotropy constant K have been investigated. From the data on the spontaneous thermal expansion and the magnetization curves, the magnetic easy axis of the 14M martensite phase was determin...

The atomic configurations at macrotwin interfaces between microtwinned martensite plates in Ni65Al35 material are investigated using high resolution transmission electron microscopy (HRTEM). The observed structures are interpreted in view of possible formation mechanisms of these interfaces. A distinction is made between cases in which the microtwins, originating from mutually perpendicular {11...

A continuum thermodynamics formulation for micromagnetics coupled with mechanics is devised to model the evolution of magnetic domain and martensite twin structures in ferromagnetic shape memory alloys. The theory falls into the class of phase-field or diffuseinterface modeling approaches. In addition to the standard mechanical and magnetic balance laws, two sets of micro-forces and their assoc...

We provide an extended Peierls–Nabarro (P–N) formulation with a sinusoidal series representation of generalized stacking fault energy (GSFE) to establish flow stress in a Ni2FeGa shape memory alloy. The resultant martensite structure in Ni2FeGa is L10 tetragonal. The atomistic simulations allowed determination of the GSFE landscapes for the (111) slip plane and 2 1⁄2 101 ; 2 1⁄2 110 ; 6 1⁄2 211...

Lath martensite reveals a specific hierarchical subgrain structure, with laths, blocks and packets of particular crystallography. The presence of interlath retained austenite layers has been reported in the literature. This paper investigates the potential influence of the interlath retained austenite on the mechanical behaviour of lath martensite subgrains. To this purpose, a martensite grain ...

Ni39+x Mn50Sn11-x (x = 0.5, 1.0, 1.5 and 2) alloys comprise multiple martensite nanostrips of nanocrystallites when cast in small discs, for example, ∼15 mm diameter and 8 mm width. A single martensite phase with a L10 tetragonal crystal structure at room temperature can be formed at a critical Sn content of 9.0 at.% (x = 2), whereas an austenite cubic L21 phase turns up at smaller x ⩽ 1.5. The...

We study the behavior of crystals that undergo martensitic transformations. On cooling, the high-temperature phase (austenite) transforms to the martensite phase changing its crystalline symmetry. The lower crystalline symmetry of the martensite gives rise to several variants of martensite. Each variant has an associated transformation strain. These variants accommodate themselves (according to...