This paper is devoted to calculating the Cartesian stiffness matrix of a translational parallel manipulator with elastic joints. The calculation takes into account the contribution of the Jacobian variation because of the change of manipulator configuration due to the elasticity and it covers the entire theoretical workspace of the manipulator. Three kineto‐static adimension...

A spherical parallel manipulator (also called an orientational parallel manipulator or rotational parallel manipulator) refers to a threedegree-of-freedom (3-DoF) parallel manipulator in which the moving platform undergoes a 3-DoF spherical motion or rotates about a fixed point. In this paper, we propose a new method for the type synthesis of non-overconstrained (isostatic) spherical parallel m...

Dynamic Singularities are shown for free-floating space manipulator systems where the spacecraft moves in response to manipulator motions without compensation from its attitude control system. At a dynamic singularity the manipulator is unable to move its end-effector in some inertial direction; thus dynamic singularities must be considered in the design, planning, and control of free-floating ...

A hyper-redundant manipulator has the advantage that it can be used in constraint space; however the control of hyper-redundant manipulator is difficult. This paper presents a concept of virtual link based two degrees of freedom (DOF) controller. With the proposed controller, manipulator of any number of links can be reduced to either a 2-link virtual manipulator or one real and one virtual lin...

The dexterity of a manipulator with passive joints, also known as an underactuated manipulator, differs from the dexterity of a fully actuated one, even if their mechanical structures are identical. Therefore, for fault tolerance and energy saving purposes, it is important to study the dexterity of underactuated manipulators. The purpose of this work is to quantify the dexterity of underactuate...

The authors propose a method of controlling the position of a manipulator with passive joints which have holding brakes instead of actuators. In this method, the coupling characteristics of manipulator dynamics are used, and no additional mechanisms are required. In this paper, the effectiveness of the method is verified by experiments using a prototype manipulator. The prototype is a two degre...

This paper investigates the use of genetic algorithm to optimize poses selection to improve kinematic calibration for manipulator. Genetic algorithm is used to determine the optimal poses while iterative least square algorithm is used to calibrate the kinematics model of the manipulator. Observability index are used to evaluate the optimality of the set of poses. The fitness function of genetic...

A servo manipulator system has been developed for remotely handling radioactive materials in a hot cell [1]. Unlike a robot manipulator, a servo manipulator is monitored and controlled by an operator all the time. A robot manipulator performs a taught or programmed task without an operator. Generally, a servo manipulator consists of a master arm and a slave arm. The slave arm is a device for wo...

In this paper, a novel 6 degrees of freedom (DOFs) adaptive parallel manipulator with large tilting capacity is presented. The manipulator consists of four identical peripheral limbs and one center limb connecting the base and the moving platform. Due to the special architecture, the doubly actuated center limb of the manipulator could have infinite inverse solutions. In every configuration of ...

Modular manipulator designs have long been been considered for use as research tools, and as the basis for easily modified industrial manipulators. In these manipulators the links and joints are discrete and modular components that can be assembled into a desired manipulator configuration. As hardware advances have made actual modular manipulators practical, various capabilities of such manipul...