Membrane contactor using amine based absorbents is an efficient technology for CO2 separation from gaseous mixtures. A novel porous polysulfone (PSF) flat membrane was prepared via non-solvent phase inversion method. The PSF membrane was modified by adding polyvinyl pyrrolidone (PVP) to the dope solution. The fabricated membrane was used in the serpentine flow field contactor module for CO2 abs...

introduction perforation of maxillary sinus mucous membrane is of the most prevalent complication during open sinus lift surgery. moreover, such complication can usually be managed by an absorbable membrane. as far as absorbable membranes are concerned, decellularized maxillary sinus mucous membranes, which is an extracellular matrix, can be used as a biologic scaffold and insulating membrane i...

Acetic acid was separated from a dilute mixture using a commercial polyvinyl alcohol (PVA) membrane.  Intrinsic separation characteristics of the membrane were studied as a function of temperature.  The degree of membrane swelling decreased marginally with increase in feed temperature. At 25oC the maximum degree of swelling was found out to be 46.3%, which reduced to 39.5%...

introduction membrane bioreactor (mbr) is an effective technology for wastewater treatment and water reuse which is becoming increasingly popular due to its numerous applications and advantages over conventional activated sludge process. this novel technology have advantages of small footprint, high concentration of mixed liquor suspended solids (mlss), high removal efficiency of chemical oxyge...

A mixed proton–electron conducting perovskite was synthesized by liquid-citrate method and the corresponding membrane was prepared by pressing followed by sintering. The hydrogen permeability of BaCe0.9Yb0.1O3-δ was studied as a function of temperature and hydrogen partial pressure (PH2) gradient. Using 100% dry hydrogen at 1173 K, the hydrogen permeation rate of dense membranes (1.63 mm thick)...

In this study, polyphenylsulfone (PPSU) hollow fiber membrane was fabricated via a wet spinning method with the addition of ethylene glycol (EG) in the range of 0-10 wt% as the additive. The EG was added to improve the membrane pore formation and interconnectivity for better membrane contactor performance in extracting and removing the free fatty acid (FFA) from crude palm oil (CPO). Four diffe...

a liquid membrane containing diethylene glycol monobutyl ether (2) shows specificity for k ion in transport while diethylene glycol dibutyl ether (1) was selective for na over k . as an extractant, ligand 2 exhibited pronounced extraction selectivity for k over na in comparison with ligand 1