Introduction Balancing mechanisms Application on TIG welding Paralleling IR standard speed IGBTs Full Bridge Inverter Power circuit Half-Bridge Inverter Output inverter stages Transient voltage and output rectifier Multi-process welding Advantages of paralleling IGBTs Mounting instructions Current and temperature unbalance ESD and correct handling Thermal runaway Discrete devices approach Concl...

In this study, a three-dimensional (3D)finite elementmodel is developed to investigate thermally induced stress field during hybrid laser–gas tungsten arc welding (GTAW) process. In the hybridwelding case, we focus on the GTAWprocess sharing commonmolten poolwith laser beam and playing an augment role in thehybridweldingsystem.Anexperiment-based thermalanalysis isperformedtoobtain the temperatu...

Both laser-arc hybrid welding and narrow gap welding have potential for the fabrication of thick sections, but their combination has been seldom studied. In this research, 40 mm thick mild steel was welded by narrow gap laser-arc hybrid welding. A weld with smooth layer transition, free of visible defects, was obtained by nine passes at a 6 mm width narrow gap. The lower part of the weld has th...

This paper explains an integrated method of using genetic algorithm on the experimental data for optimizing the process parameters for height to width ratio and use of artificial neural network techniques for predicting the effects on the four weld bead geometric descriptors (front height, front width, back height and back width) by the five controlling weld process variables (welding speed, wi...

Experiments have been conducted to investigate the influence of cusp external magnetic field (EMF) on deposition rate two-electrode tungsten insert gas (T-TIG) welding. T-TIG arc parameters such as shape, voltage, pressure, and plasma information were acquired respectively. Results showed that compared TIG a higher welding current could be allowed for due its low pressure characteristic. Under ...

In this experimental work, Manganese oxide (MnO2), Zinc oxide (ZnO), Iron oxide (Fe2O3) and Magnesium chloride (MgCl2) were used as activating flux to investigate the effects for SS 304 in tungsten inert gas (TIG) welding. Ultimate tensile strength, percentage elongation, Penetration depth and width were studied of material SS 304. The experimental results indicated that the MnO2 and Fe2O3 flux...

This paper is focused on the study and the control of a deposition process of robotic arc welding. The process consists of a SMD (Shaped Metal Deposition) system, that is a novel rapid prototyping tungsten inert gas (TIG) welding technique leading to near-net-shape, using a layer by layer deposition technique. An experimental setup has been properly implemented in order to study the system and ...

Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...