نتایج جستجو برای: laser beam annealing
تعداد نتایج: 308051 فیلتر نتایج به سال:
cw laser annealing has been applied to synthesize the metastable A 15 superconductors, Nb3AI and Nb3Si. Qualitative agreement with the equilibrium phase diagrams have been obtained for the Nb-AI system. Laser annealing permits the high-temperature A15 phase to be fast quenched to room temperature without decomposition. Subsequent use of multiple low-temperature laser scans raises the supercondu...
Surface roughness in the welding processes is one of the important parameters in the laser welded metal connections which affects laser beam absorption directly. When the laser beam is irradiated to the surface of the base metal, the surface roughness plays an important role in the amount of beam absorption and the amount of melting achieved and directly affects the penetration depth. The main ...
In this paper altitude measurement from water surface using laser beam is presented. Research data indicate that the reflection of infrared waves from water surface is about zero and it is less than 2% for visible radiations. Phase-shift and heterodyne technique was used for the measurement, and the laser beam ( mW p nm 10 , 700 = = l ) was modulated by a sine wave having a fixed frequency....
In this research we measure some of the optical parameters of Barium Titanate crystal (BaTiO3), such as signal beam gain, coupling constant (exponential gain coefficient), change in index refraction and photorefractive sensitivity, which are very significant for optical data storage. In all experiment, two- wave mixing configuration at 632.8 nm (He- Ne laser) were used. Experimental data f...
Laser is one of the sources that induce a biological effect in higher plants. The positive effect of laser on some crops has been proved. This research was carried out to study the effect of laser radiation on the accumulation of proline in spring wheat (Triticum aestivum cv. Kavir) under different NaCl treatment levels. Semi-coherent red beam, infrared beam and one-second harmonics of Neodymiu...
As application of re-activation of backside on power device Insulated Gate Bipolar Transistor (IGBT), laser annealing was employed to irradiate amorphous silicon substrate, and resistivities were measured using four point probe measurement. For annealing the amorphous silicon two lasers were used at wavelength of visible green (532 nm) together with Infrared (793 nm). While the green laser effi...
Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation ind...
The novel apparatus described here was developed to investigate the thermo-mechanical behavior of metallic films on a substrate by acquiring the wafer curvature. It comprises an optical module producing and measuring an array of parallel laser beams, a high resolution scanning stage, a rapid thermal processing (RTP) chamber and several accessorial gas control modules. Unlike most traditional sy...
Pulsed non-melt laser annealing (NLA) has been used for the first time to modify nearsurface defects and related junction properties in Cu(In,Ga)Se2 (CIGS) solar cells. CIGS films deposited on Mo/glass substrates were annealed using a 25 ns pulsed 248 nm laser beam at selected laser energy density in the range 20–60mJ/cm and pulse number in the range 5–20 pulses. XRD peak narrowing and SEM surf...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید