A method for detection and classiication of defects originating from rivet holes in a riveted lap-joint using eddy current (EC) inspection is presented in this paper. The EC-signals were acquired from a number of lap-joints using a tailor-made deep penetrating probe, and a digital single frequency EC-instrument. A number of rivets in the lap-joints had defects located in the second layer of the...

In this paper, the lap splice length and the long-term (fatigue) performance of lap-spliced carbon FRP laminates were investigated. Lap-spliced CFRP coupon specimens were fabricated with a splice length of 12.7, 25.4, 38.1, 50.8, 76.2, and 101.6 mm. To eliminate the bending on the lap splice joint, a symmetric specimen configuration was adopted. The width of the specimens was 38.1 mm. These spe...

Two different cases regarding the zinc coating at the lap joint faying surface are selected for studying the influence of zinc vapor on the keyhole dynamics of the weld pool and the final welding quality. One case has the zinc coating fully removed at the faying surface; while the other case retains the zinc coating on the faying surface. It is found that removal of the zinc coating at the fayi...

DP600 steel and AA7075-T6 aluminium alloy plates were joined using the friction stir spot welding process. The effects of different tool rotational speeds on mechanical properties, intermetallic compound formation interface microstructure welded joints investigated. highest lap shear tensile load was obtained from samples at a speed 1040 rpm (6.5 kN). It determined that joint decreased with inc...

A pure Ni interlayer with a thickness of 0.1 mm was introduced between high-strength interstitial free steel and Al–Mg–Si alloy, which were friction stir lap welded, producing an excellent welded joint. The interface layer consisted γ-Ni solid solution, the mixed stirring zone contained alternate lamellae α-Fe solutions. addition strongly suppressed reaction Al Fe because atomic arrangement Ni....

Many inverse problems involve two or more sets of variables that represent different physical quantities but are tightly coupled with each other. For example, image super-resolution requires joint estimation of image and motion parameters from noisy measurements. Exploiting this structure is key for efficiently solving large-scale problems to avoid, e.g., ill-conditioned optimization problems. ...

0020-7683/$ see front matter 2008 Elsevier Ltd. A doi:10.1016/j.ijsolstr.2008.11.016 Abbreviations: ASTM, ASTM International; CC, co continuous cohesive zone method; CPE4I, bilinear inc elements; DACE, design and analysis of computer cantilever beam; DCZM, discrete cohesive zone metho finite element; LEFM, linear elastic fracture mech sampling; SLJ, single lap joint; TTL, trapezoidal tractio * ...