Large amounts of ash, generated from biomass gasification, often contaminate syngas and the ecosystem. This study showed that the ash obtained from the gasification of pine wood was primarily composed of carbon (15% to 25%), minerals (~21%), and oxygen (52% to 63%), and exhibited low surface area (8.4 to 11.2 m/g). The size of ash particles was between 600 nm and 600 μm. Calcium, potassium, and...

In the present paper, the elemental composition of wood ashes obtained by the combustion of wood in a fireplace was determined with the use of ICP-MS and ICP-OES techniques. Wood ashes may find a potential application as deacidifying agents and soil conditioners, since they contain calcium (in the form of CaCO(3) and CaO), potassium (in the form of K(2)SO(4) and K(2)CO(3)) and significant level...

The behaviour of alkali metals, especially of potassium, during circulating fluidised bed combustion of wood-based fuels was studied experimentally in pilot-scale and industrial scale combustors. The fuels included willow, forest residue and waste wood co-combusted with paper mill sludge. As a result of this work, the main chemical and physical transformation mechanisms of potassium compounds i...

Oxidation of soils with 333 mM potassium permanganate (KMnO4) has been identified as a means to quantify labile soil carbon (C) and may have potential for rapid measurement of biologically active soil C. In the current study, active C pools in several soils were estimated by oxidation with a range of KMnO4 concentrations and compared to estimates determined from carbon dioxide evolution during ...

Residential combustion has been identified as one of the main sources of particulate matter (PM); fine particles are important because of their adverse effects on human health and the environment. In this thesis, fine particle emissions originating from residential pellet combustion were characterized in different operational situations and using different raw materials as pellet fuel. Moreover...

the purpose of this study is the utilization of furfural residue for heating energy and activated carbon production. to evaluate the energy production of the residue, bulk density, melting point, and heating value were measured. furthermore, moisture, ash, volatile compounds, fixed carbon, lignin, and elements were determined. ash and volatile content average were measured at 15.4% and 68.9%, r...

Fuel blending is a widely used approach in biomass combustion, particularly for feedstocks with low calorific value and high moisture content. In on-site sanitation technologies, fuel blending is proposed as a pre-treatment requirement to reduce moisture levels and improve the physiochemical properties of raw faeces prior to drying. This study investigates the co-combustion performance of wood ...

The fuel properties of wood can be summarized by ultimate and proximate analysis and determination of the high heating value. It is not valid to list these values for species since a species has not been adequately sampled and tested. Enough is known, however, to say that softwoods have a high heating value of about 9,000 Btu per pound; whereas hardwoods have a value of about 8,600 Btu per poun...

Wood ash has been widely used as an additive for excreta from dry compost toilets to sanitize it for reuse. However, there is dearth of quantitative information about its efficiency in sanitizing partially digested sludge from wet onsite sanitation systems. This paper presents findings of a series of two experimental studies to assess optimum wood ash dosages required to raise the pH of partial...