background and purpose:the presence of dyes in wastewaters may cause serious problems for the environment because of their high toxicity to aquatic organisms and unfavorable aesthetical impact. in the present study, multi-walled carbon nanotubes (mwcnts) were used for removal of anionic dyes direct blue 106 (db106) and acid green 25 (ag25), from water samples. materials and methods:mwcnts were ...

conclusions considering the simplicity and efficiency of zero valent iron powder, this method is recommended for removing azo dyes from aqueous environments. results the results of this research showed ph = 3 and contact time = 120 minutes, increasing the zvi dose from 200 to 5000 mg/l in 100 mg/l dye concentration, increased the adsorption efficiency from 36.78% to 97.57%. rr-198 removal follo...

fine particles silicoaluminophosphate-34 were synthesized by hydrothermal sol-gel method. the effect of crystallization time, as one of the important synthesis factors on particle size and crystallinity, kinetic and equilibrium adsorption, and selectivity of co2 / ch4 has been studied in this work. the adsorption isotherms are obtained at moderate gauge pressures (100-3000 kpa) and temperatures...

   In this study, cadmium sulfide nanoparticles (CdS NPs) were prepared, characterized and used as a new adsorbent for simultaneous removal of Pb(II) and Cu(II) ions from aqueous solutions. Using a batch adsorption method, the effects of solution pH, contact time, adsorbent dose, and temperature were studied and optimized. Removal efficiencies, higher than 98% were obtained for both the met...

In the present study, comparative batch adsorption of basic dye namely Crystal Violet (CV) using the almond shell as an adsorbent in untreated form and activated with sodium hydroxide was carried out in search of optimum adsorption conditions. The operation parameters investigated was contact time (10 to 80 min), initial dye concentrations (40-240 mg/L), temperature, (20-5...

background: the efficacy of nh4cl-induced activated carbon (nac) was examined in order to adsorb rr198, an azo reactive model dye, from an aqueous solution. methods: the effects of ph (3 to 10), adsorbent dose (0.1 to 1.2 g/l), dye concentration and contact time on the adsorption efficiency were investigated. results: the results showed that the removal of dye was highest at a solution ph of 7 ...

in this study metal oxide nano powder namely nio nanopowder was prepared .the producedmetal oxide was characterized and used as potential adsorbent for the removal of pb and zn from aqueoussolution. the rate of uptake of the pb and zn are rapid in the beginning and the time required for equilibrium adsorption is 120 min .the time of equilibrium as well as time required to achieve a definite fra...

In this paper, dye removal ability of the surface modified nanoparticle SMN copper ferrite from single and quaternary systems was investigated. Acid Blue 92 AB92, Direct Green 6 DG6, Direct Red 23 DR23 and Direct Red 80 DR80 were used as model compounds. The effect of surfactant concentration, adsorbent dosage, dye concentration and pH on dye removal was evaluated. The adsorption isotherm and k...

background & aims of the study: dyes are one of the widespread chemicals which may have many adverse effects on life cycle. thus, this study was conducted to survey the rb19 dye removal efficacy from aqueous solution, using the sio2 nanoparticles. materials and methods: this study was an experimental-lab study. the batch adsorption system were utilized to evaluated the rb19 dye removal efficien...