The ability to growth in milk is an important feature for lactic acid bacteria (LAB) used as starters for fermented milk products. Several decades ago the results of the studies varied widely: some of them showed that LAB grew better in raw milk and others demonstrated improved growth of the bacteria in heat-treated milk (Foster et al., 1952). The effectiveness of heat treatment of milk as a to...

laminar free convection heat transfer from vertical and inclined arrays of horizontal isothermal cylinders in air was investigated experimentally and numerically. experiments were carried out using mach-zehnder interferometer and the fluent code was used for numerical study. investigation was performed for vertical and horizontal cylinder spacing from 2 to 5 and 0 to 2 cylinder diameters respec...

Due to the rapid cooling of the slag infiltrated into the mold-strand gap, it is expected that the rate of devitrification of the glass formed plays a key role in determining the proportion of crystalline phases influencing mold heat transfer. In this investigation, a novel procedure to calculate Time-Temperature-Transformation (TTT) curves of mold slags is presented. It is based on the integra...

INCONEL alloy 783 was annealed and aged following the standard heat treatment procedure. One set of specimens was then isothermally exposed at 500 degrees C for 3000 h. Mechanical properties were measured at room temperature and 650 degrees C, and the results showed the prolonged exposure increased the strength and decreased elongation of alloy 783. The microstructures of as-produced and expose...

Two industrial ASTM Portland cements were carefully tested for heat of hydration (HOH) continuously up to 7 days at 23o C using isothermal conduction calorimetry in accordance to ASTM C1702. Internal and external mixing procedures were implemented. The results for HOH measurements at 7 days using isothermal calorimetry were compared to those obtained through heat of solution method (ASTM C186)....

A PM approach is investigated in the context of extremely fine low temperature bainitic steels with a reasonable combination of ultimate tensile strength and uniform elongation. The strategy consists of three steps. First, ball milling is used for mechanical alloying and to create a large density of interfaces prior to sintering. In the second step, spark plasma sintering is used as a rapid con...

The precipitation behavior of the α strengthening phase in metastable β-Ti alloys is highly dependent on heat treatment parameters such as quenching rate, heating rate and ageing temperature. In this paper we have investigated the influence of quenching rate on the formation of isothermal ω precipitates that have been regarded as potent nucleant sites for α precipitation. The results show that ...

The Carnot cycle and its deduction of maximum conversion efficiency of heat inputted and outputted isothermally at different temperatures necessitated the construction of isothermal and adiabatic pathways within the cycle that were mechanically "reversible", leading eventually to the Kelvin-Clausius development of the entropy function S with differential dS = dq/T such that [symbol: see text]C ...