The present study was carried out to investigate the potential of carboxylate group functionalized Multi-walled carbon nanotubes (MWCNT−COOH) adsorbent for the removal of Methyl orange (MO) textile dye from aqueous solutions. The effects of pH, shaking time and temperature on adsorption capacity were studied; the contact time to obtain equilibrium at 298 ˚K was fixed at 25 min. The effect of te...

in this work, efficiency and performance of hazelnut shells (hs) adsorbent was examined for the removal and recovery of direct red 12b (dr12b) from wastewater. the absorbance of dr12b was measured spectrophotometrically at λmax=523 nm before and after adsorption of dr12b. the maximum removal was 99.8% for 30 mg l –1 ofdr12b concentration on 0.3 gr hs adsorbent. acidic ph was favourable for the ...

a two-dimensional (2d) single particle model for the copolymerization of propylene-ethylene with heterogeneous ziegler-natta catalyst is developed. the model accounts for the effects of the initial shape of the catalyst and carck/ pore patterns on the copolymer composition, polymerization rate and the average molecular weight properties. the spherical and oblate ellipsoidal shapes of catalyst p...

The apparent diffusion coefficient (ADC) obtained by helium-3 magnetic resonance imaging over several seconds is thought to reflect diffusion impairment due to both intra- and interacinar structure. In this study, numerical simulations of intra-acinar gas mixing and effective diffusion were performed in a multiple-branch-point model of the human acinus. Using a previously described method, we c...

The porosity within a reservoir rock is a basic parameter for the reservoir characterization. The present paper introduces two intelligent models for identification of the porosity types using image analysis. For this aim, firstly, thirteen geometrical parameters of pores of each image were extracted using the image analysis techniques. The extracted features and their corresponding pore types ...

Abstract This study investigated removal mechanisms, thermodynamics, and interferences of phosphorus adsorption onto nanoscale zero-valent iron (nZVI)/activated carbon composite. Activated was successfully used as support for nZVI particles to overcome shortcomings using include its tendency aggregate separation difficulties. A comprehensive characterization done the composite particles, which ...

Fluoride removal from water is being investigated using a natural adsorbent derived from bark of pinus kesiya. Batch studies were performed to study the effect of adsorbent dose, contact time, initial fluoride concentration and pH on the removal efficiency. The fluoride adsorption varies over wide range of pH and best in between 3 – 8. The rate of adsorption was rapid and maximum removal took p...

This paper presents the feasibility of removal of basic dye malachite green from aqueous solutions by using a low cost AC-MnO2-NC. Batch adsorption experiments were carried out as a function of pH, contact time, initial concentration of the adsorbate, adsorbent dosage and temperature . Langmuir, Freundlich and Tempkin isotherms were also studied . Pseudo first order, Pseudo second order , intra...

Nitrilotriacetic acid functionalized Adansonia digitata (NFAD) biosorbent has been synthesized using a simple and novel method. NFAD was characterized by X-ray Diffraction analysis technique (XRD), Scanning Electron Microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analyzer, Fourier Transform Infrared spectrometer (FTIR), particle size dispersion, zeta potential, elemental analysis (C...

Discharge of untreated industrial wastewater containing heavy metals such as Pb2+ is hazardous to the environment due to their high toxicity. This study reports on the adsorption, desorption, and kinetic study on Pb2+ removal from aqueous solutions using wood/Nano-manganese oxide composite (WB-NMO). The optimum pH, contact time and temperature for adsorption were found...