In this paper, a 5.2GHz low noise amplifier in 0.25um CMOS utilizing inter-stage matching is designed. Two realizations for a low value of inductor within the LNA are implemented. The measurement results are 7dB gain and 5.86dB noise figure is achieved for the on-chip inductor realization, and 8.3dB gain and 5.74dB noise figure is achieved for the bond-wire inductor realization.

This paper reports a single-wafer micromachined radiofrequency (RF) inductor that can be integrated in a conventional RFIC device. The inductor achieved a quality factor greater than 9 at 5Ghz and a self-resonance frequency well above 15 GHz. The inductor is tunable and the inductance variation is greater than 8%.

In this paper an efficient high step-up converter with a coupled- inductor with soft- switching operation is presented. The proposed topology includes a coupled-inductor boost converter for raising the voltage gain. Moreover, a simple auxiliary resonant circuit composed of an auxiliary switch, a clamping diode and a resonant tank (inductor, capacitor), is adopted in this paper. The coupled-indu...

The input electrical impedance behaves as a capacitive when a piezoelectric transducer is excited near its resonance frequency. In order to increase the energy transmission efficiency, a series or parallel inductor should be used to compensate the capacitive impedance of the piezoelectric transducer. In this paper, the effect of the series matching inductor on the electromechanical characterist...

In this paper, a novel lossless floating inductor simulator with four resistors, a grounded capacitor and five two-terminal active components such as negative impedance converter, current follower and voltage follower, is presented. The capacitor in the floating inductor simulator is grounded, which provides suitability for integrated circuit fabrication. However, it needs resistive matching co...

This paper presents a Sub-mW differential Common-Gate Low Noise Amplifier (CGLNA) for ZigBee standard. The circuit takes the advantage of shunt feedback and Dual Capacitive Cross Coupling (DCCC) to reduce power consumption and the bandwidth extension capacitors to support 2.4 GHz ISM band. An amplifier employing these techniques has been designed and simulated in 0.18 mm TSMC CMOS technology. T...

An eddy current sensor with an ink-jet printed flexible inductor has been designed and fabricated. The inductor has been designed by means of software developed in-house. It has been fabricated by ink-jet printing with silver ink on a flexible substrate. The inductor is a part of the oscillator circuit whose oscillating frequency is measured by a microcontroller. The sensor characteristics have...

Inductor with gradual changed metal width and space by good design can get better Q factor than the inductor with fixed metal width and space. In this paper, a simple wide-band inductor model is presented considering both the increase of resistance and the decrease of inductance due to the skin and proximity effects. This model has been verified with simulation and the experimental results of s...

This paper presents the electrical and thermal analysis of an OLED module. The OLED module consists of the OLED element and the DC-DC converter incorporated in its backplane. The DC-DC converter is realized as an integrated circuit and uses an external inductor. The inductor is embedded in the substrate of the backplane and has a spiral geometry. The DC-DC converter is highly efficient, but a f...

Low Noise Amplifier (LNA) is one of the essential components in Ultra Wideband (UWB) devices. Conventional LNA suffers from large chip area, high power consumption and inadequate Noise Figure (NF). A compact UWB LNA in the bandwidth of 3.1 to 10.6 GHz is proposed. The design is based on inductor-less configuration using the resistive shunt feedback topology and noise canceling techniques for wi...