Heat treated melt-spun ribbons of (Nd La) Fe Co Nb B have been studied systematically by supercon-ducting quantum interference device (SQUID) magnetometry, conventional transmission electron microscopy (CTEM) and Lorentz transmission electron microscopy (LTEM). The sample's microstructure grew from an amorphous state through a partially crystallized state at 6503C, and "nally to a fully crystal...

Introduction: The Zakłodzie meteorite, a moderately weathered find discovered near the village Zakłodzie, Poland, is an ungrouped enstatite-rich achondrite ascribed to an impact melt [1] or internal melting within the parent body [2]. During our nanomineralogy investigation of the Zakłodzie meteorite, a new Fe-dominant monosulfide mineral, (Fe,Zn,Mn)S with the P63mc wurtzite-type structure was ...

The effect of N-doping on the microstructure and magnetic properties of thin Fe layers has been employed to construct all Fe-electrode magnetic tunnel junctions that displayed the tunneling magnetoresistance (TMR) effect. Using low nitrogen doses, a reduction in coercivity was achieved due to grain refinement, without a concurrent decrease in the saturation magnetization of the Fe films caused ...

Approximately 1% of presolar SiC grains found in primitive meteorites condensed in the ejecta of Type II supernovae. To explain the isotopic signatures of these so-called X grains, material from different SN zones had to contribute to the mix from which the grains formed. We measured the Fe and Ni isotopic ratios of individual X grains with the NanoSIMS. Most grains have enhanced 57 Fe/ 56 Fe r...

Bulk SmCo5/a-Fe nanocomposite magnets have been prepared using a Joule-heating compaction technique. Nearly fully dense bulk magnets are obtained by compacting the milled powders under a pressure of 2 GPa at temperatures above 400 C. Structural analysis shows that the grain size of both the SmCo5 and the a-Fe phases is in the range of 10 to 15 nm when the compaction temperature is lower than 50...

The autonomous repair mechanism of creep cavitation during high-temperature deformation has been investigated in Fe-Au and Fe-Au-B-N alloys. Combined electron-microscopy techniques and atom probe tomography reveal how the improved creep properties result from Au precipitation within the creep cavities, preferentially formed on grain boundaries oriented perpendicular to the applied stress. The s...

The resistance of high-angle grain boundaries to cleavage cracking in Fe–3wt.%Si bicrystals is discussed in context of linear elastic fracture mechanics based on an energy method. The grain boundary toughness is determined by the fracture work associated with the plastic shear along the grain boundary and the crack-trapping effect. The influence of the crystallographic misorientation and the si...

X-ray diffraction, transmission electron microscopy, and differential scanning calorimetry were used to study the thermal stability of highly supersaturated nanocrystalline Fe,Cul,-, alloys (10~~~95) synthesized by mechanical alloying. Alloys with x < 60 exhibit single-phase fee structure while single-phase bee alloys form for x > 80. For 6O<x<80 fee and bee phases coexist. Heating to elevated ...

Field experiments were conducted at Government Adaptive Research Farm Karor Lal Eason, districtLayyah, to study the impact of trace elements on uptake of nitrogen, phosphorus, potassium and yield of wheat. The experiments were laid out in RCBD having three replications. Soil samples were collected before sowing of crop from 0-15 cm depth and analyzed for physical and chemical properties (textur...

iron deficiency in soil reduces the quality of durum wheat leading to fe deficiency in human. thus, this experiment investigated the effects of foliar application of nano-iron oxide (2 and 4 g l-1), iron chelate (edta), (4 and 8 g l-1), iron sulfate (4 and 8 g l-1), and the control on grain yield and quality, yield components, chlorophyll and carotenoids contents, peroxidase (pox), catalase (ca...