In support of technology development to utilize coal for efficient, affordable, and environmentally clean power generation, the Power Systems Development Facility (PSDF), located in Wilsonville, Alabama, has routinely demonstrated gasification technologies using various types of coals. The PSDF is an engineering scale demonstration of key features of advanced coal-fired power systems, including...

Coal is the dominant source of energy in China, but about 50% of the coal resource is left underground unmined. Because of this, the “long-tunnel, large section, two-stage” Underground Coal Gasification (UCG) technology has been put forward, and the UCG model platform has been built. Simulation tests are underway and some gasification parameters have been obtained. Five field trials have been c...

Rubber wood (Ficus elastica) is one the biomass waste that can be used as raw material for a gasification process and has a calorific value of 4,069 cal/gram. Gasification is a process to convert a solid fuel to syngas (CO, CH4, and H2) through a combustion process using limited air between 20% to 40% of air stoichiometry. Depending on the direction of airflow, the gasifiers are classified as u...

Gasification is a process that converts organic or fossil based carbonaceous materials into carbon monoxide, hydrogen and carbon dioxide. The process of producing energy using the gasification method has been in use for more than 180 years. During that time coal and peat were used to power these plants. Initially developed to produce town gas for lighting & cooking in 1800s, this was replaced b...

Municipal sludge contains significant amounts of energy, which can be exploited by the use of anaerobic digestion, combustion or gasification. However, the relatively high moisture content of dewatered biosolids (usually over 80%) and long field experience makes anaerobic digestion the most favourable process for energy production from biosolids. Micro-sieves are novel apparatuses for the remov...

The Burlington, Vermont gasifier is the first commercial scale demonstration of Future Energy Resources SilvaGas biomass gasification process. The gasification plant is the largest operation of its type in the United States. The Burlington plant is coupled to the McNeil station of the Burlington Electric Department and is being used to evaluate and demonstrate the gasification technology both a...

Biomass is becoming a large renewable resource for power generation; it is involved in higher frequency in environmentally clean processes, and even it is used for biofuels preparation. On the other hand, hydrogen – other energy source – can be produced in a variety of methods including gasification of biomass. In this study, the production of hydrogen by gasification of biomass waste is examin...

Chemical looping gasification (CLG) is a promising method for the utilization of biomass to produce syngas. However, its realization is largely dependent on the use of an oxygen carrier with a high and stable reactivity in cyclic reduction and oxidation. This work focused on the improvement of reactivity and stability of CuO in chemical looping gasification via the addition of MgAl2O4 as an ine...

Hydrogen is an important chemical in many industries and it is expected to become one of the major fuels for energy generation in the future. Unfortunately, hydrogen does not exist in its elemental form in nature and therefore has to be produced from hydrocarbons, hydrogen-containing compounds or water. Above its critical point (374.8C and 22.1MPa), water has lower density and viscosity, and a ...

It is well known that fossil fuel combustion has tremendous negative impact on ecology and global climate. It is non renewable as well. The present rate of technological and economic growth of a country may be unsustainable due to rapid consumption of fossil fuel like crude oil, natural gas or coal. Thus people search for viable renewable energy sources like biomass, hydropower, geothermal ener...