Hydrate slurry has been reported to be a suitable secondary fluid for refrigeration and air-conditioning systems. The latent heat of CO2 hydrate is 387 kJ/kg under phase equilibrium condition of 7 °C and 30 bar. The utilization of CO2 hydrate slurry in air-conditioning systems is promising in improving the energy efficiency and shifting energy supply and demand load as well as relieving greenho...

A Raman spectrometer extensively modified for deep ocean use was used to measure synthetic hydrates formed in an ocean environment. This was the first time hydrates formed in the ocean have been measured in situ using Raman spectroscopy. Gas hydrates were formed in situ in the Monterey Bay by pressurizing a Pyrex cell with various gas mixtures. Raman spectra were obtained for sI methane hydrate...

Methane hydrates (MHs) are present in large amounts in the ocean floor and permafrost regions. Methane and hydrogen hydrates are being studied as future energy resources and energy storage media. To develop a method for gas production from natural MH-bearing sediments and hydrate-based technologies, it is imperative to understand the thermal properties of gas hydrates. The thermal properties' m...

This collaborative effort to compare the world’s leading gas hydrate reservoir simulators is designed primarily to exchange information and insight that will lead to the improvement in simulation capability of experimental and naturally occurring gas hydrate accumulations. The initial phase of the code comparison activity achieved the simulation of five problems of increasing complexity by five...

The effects of porous medium heterogeneity on methane hydrate formation, water flow through the heterogeneous hydrate-bearing sand, and hydrate dissociation were observed in an experiment using a heterogeneous sand column with prescribed heterogeneities. X-ray computed tomography (CT) was used to monitor saturation changes in water, gas, and hydrate during hydrate formation, water flow, and hyd...

One of the new approaches for capturing carbon dioxide from treated flue gases (post-combustion capture) is based on gas hydrate crystallization. The basis for the separation or capture of the CO(2) is the fact that the carbon dioxide content of gas hydrate crystals is different than that of the flue gas. When a gas mixture of CO(2) and H(2) forms gas hydrates the CO(2) prefers to partition in ...

As the foundation of energy industry moves towards gas, flow assurance technology preventing pipelines from hydrate blockages becomes increasingly significant. However, the principle of hydrate inhibition is still poorly understood. Here, we examined natural hydrophobic amino acids as novel kinetic hydrate inhibitors (KHIs), and investigated hydrate inhibition phenomena by using them as a model...

The effect of overpressure on gas hydrate and free gas distribution in marine sediments is studied using a one-dimensional numerical model that couples sedimentation, fluid flow, and gas hydrate formation. Natural gas hydrate systems are often characterized by high sedimentation rates and/or low permeability sediments, which can lead to pore pressure higher than hydrostatic (overpressure). To q...

Given that most of the gaseous constituents of industrial chimneys are usually carbon dioxide which is one of the most important greenhouse gases. It seems that the hydration process is one of the newest methods for the separation of this gas from gaseous mixtures. In the gas hydrate formation industry, in addition to disadvantages, there are some advantages such as gas separation, transmission...

Clathrate hydrate formation and subsequent plugging of deep-sea oil and gas pipelines represent a significant bottleneck for deep-sea oil and gas operations. Current methods for hydrate mitigation are expensive and energy intensive, comprising chemical, thermal, or flow management techniques. In this paper, we present an alternate approach of using functionalized coatings to reduce hydrate adhe...