In this study, the newly designed bipolar plate for proton exchange membrane fuel cells (PEMFC) was produced by spray-coating the Ni65Cr15P16B4 metallic glassy alloy on Al plate. The Ni65Cr15P16B4 metallic glass was adopted as a coating material because of its excellent corrosion resistance and the high velocity oxy-fuel (HVOF) spray coating was used for the metallic glass deposition on the Al ...

The statistical behavior of droplets in a kerosene pressure-atomized spray was investigated under swirling and burning conditions. This case was studied in order to better understand individual droplet transport processes downstream of the fuel spray flame. A two-component phase-Doppler particle sizing system was employed to provide information on the droplet size and velocity distributions as ...

With latest improvements in MEMS, combustion based Micro-Power generation devices are seen as alternatives for conventional batteries because of the high energy densities of Hydrogen and other hydrocarbon fuels. An important feature of micro-power system is to utilize the combustion of fuel or propellant in the micro-burner to produce the gas with high temperature and high pressure to drive tur...

This work focuses on the modeling and feedback control of the high velocity oxygen fuel (HVOF) thermal spray processing of WC–Co coatings. A first-principles-based process model is proposed to explore the fluid dynamics and particle inflight behavior in the HVOF flow field. Rule-based stochastic simulation, which encapsulates the main features involved in the deposition process, is used to capt...

Robust manufacturing of micro parts at high throughput needs tailored concepts and methods to assure unchanging work piece quality. An actual challenge is the dimensional metrology with meso-to-microscopic high-aspect ratio features of micro-system components, e.g. micro gears for watches and micro motors, ferrules of optical fibers, hollow microneedles for painless drug delivery into living ce...

An experimental study is performed to investigate the fuel impingement on cylinder walls and piston top inside a directinjection spark-ignition engine with optical access to the cylinder. Three different fuels, namely, E85, E50 and gasoline are used in this work. E85 represents a blend of 85 percent ethanol and 15 percent gasoline by volume. Experiments are performed at different load condition...

In cookware industry, interior spray coating process is an important process to protect the cookware product from the corrosion. In this process, the coating material “TEFLON” is used to spray to cover all the part’s surface. If a pot or pan is not too deep, one spray gun is enough to spray to cover all the interior surface. However, for the high side-wall pot, two spray guns must be used to sp...

The coupling of Eulerian and Lagrangian methods in the Eulerian–Lagrangian Spray Atomization (ELSA) approach is critical. This study proposes an equation for primary breakup particle diameter D a diesel fuel spray adopts it as key transition criterion coupling. A three-dimensional modeled by large-eddy simulation (LES) approach. improved ELSA was conducted using various criteria Dcr. results sh...

A rapid compression machine (RCM) has been designed and built for investigating the autoignition characteristics of bio-derived jet and diesel fuels. The RCM has been designed with a particular emphasis on versatility, so that non-volatile fuels may be tested in a premixed gas phase, as a fuel spray, or as an aerosol in an oxidizing bath gas. A blend of these test approaches provides insight in...