pavement permanent deformations due to lack of shear strength in mixture are a major reason of rutting. any simple test to determine mixtures resistance to permanent deformation isn’t distinguished in the 1st level of superpave mix design method and prevalent methods for evaluating mixture rut resistance are expensive and time-consuming. two aggregate types, gradations, asphalt cements and fill...

The fuel resistance property plays an important role in asphalts, but available standards for determining this characteristic are presently lacking. In the present work, a number of polymer modified bitumen with styrene-butadiene-styrene (SBS) polymer (4, 5, 6% SBS) and SBS/ sulfur modified bitumen with various percentages of sulfur (1.65, 3, 3.5% based on polymer content) were prepared. Each s...

Limited studies in recent years have shown that asphalt pavement subject to seawater in coastal regions or deicing salt in cold regions may be seriously damaged after being soaked in saline water for a long time. However, there is limited research into the influence of salt on rheological properties of asphalt after long-term aging. In this study, rheological properties of unmodified and polyme...

A new composite membrane system, Geo-SealTM, has been developed that offers exceptional chemical resistance for use as a vapor barrier at brownfield sites. Data generated in controlled laboratory conditions indicate the composite membrane to have < 0.2X the volatile organic compound partitioning when compared to spray applied latex/asphalt vapor barriers. More importantly, data generated under ...

Copper slag (CS) is an abrasive blasting grit made of granulated slag from metal smelting processes. As copper slags are known to be waste material and cause a lot of environmental problems, it would be a good idea to use them in different sections of industry such as pavement construction. On the other hand, in order to save energy and reduce the amount of pollutants re...

Asphalt has been modified for the past several decades using various additives, including synthetic polymers. Polymer modification improves structural and engineering characteristics of the binder, which is a result of improvement in rheological characteristics of binder as well as its adhesion capability with the aggregate. Such enhancement inevitably enhances the performance characteristics o...

Today, rapid economic and industrial growth generates increasing amounts of waste materials such as waste tyre rubber. Attempts to inspire a green technology which is more environmentally friendly that can produce economic value are a major consideration in the utilization of waste materials. The aim of this study is to evaluate the effect of waste tyre rubber (crumb rubber modifier (CRM)), in ...

In this paper, it has been attempted to evaluate the performance of asphalt overlays which were reinforced with geogrid, modified by sasobit and combination of them on rehabilitation of reflective cracking. The laboratory tests under dynamic loading in bending mode were conducted to investigate reflective cracking retardation compared to reference samples. The results illustrated that in a cert...

Fatigue characteristics of asphalt binder have an important role in asphalt mix resistance against cracking. Viscoelastic Continuum Damage (VECD) analysis of asphalt binders has been successfully used in highway research works in order to predict fatigue behavior of hot mix asphalt (HMA). In this method an intrinsic property of the material, called damage function is obtained which is independe...

The classical asphalt mix manufacturing commonly requires the heating and the complete drying of aggregates. The induced energy cost has opened the way to develop alternatives processes with low energy/ carbon materials such as Warm Mix Asphalt (WMA). Their manufacturing requires specifics techniques to achieve similar performances than Hot Mix Asphalt (HMA). However, manufacturing temperature ...