This paper presents a review on the combustion mode design with high efficiency and low emissions controlled by fuel reactivity and mixture stratification that have been conducted in the authors’ group, including the charge reactivity controlled homogeneous charge compression ignition (HCCI) combustion, stratification controlled premixed charge compression ignition combustion, and dual-fuel com...

Emissions from flares typical of those found at oil-field battery sites in Alberta, Canada, were investigated to determine the degree to which the flared gases were burned and to characterize the products of combustion in the emissions. The study consisted of laboratory, pilot-scale, and field-scale investigations. Combustion of all hydrocarbon fuels in both laboratory and pilot-scale tests pro...

According to the International Energy Agency's World Energy Outlook 2011, 60 per cent of the population in Africa, some 587 million people, mostly in sub-Saharan Africa, lacked access to electricity in 2009. We developed a 6.5 kWe micro-trigeneration prototype, on the basis of internal combustion engine with pure Croton megalocarpus oil (CMO) fuelling, which configures a distributed energy syst...

fuel oil used in power plants contain metal impurities like vanadium. after combustion, this metal remains in boiler fuel ash in the form of oxide. in this research, extraction of vanadium oxide from fuel ash has been investigated. two processes were used for this purpose. a pyro- hydrometallurgy and a hydrometallurgy process. in the pyro-hydrometallurgy process, using sodium carbonate, salt ro...

In CI engines, the evaporation rate of fuel on various hot surfaces, including the combustion chamber, has a significant effect on deposit formation and accumulation, the exhaust emissions of PM and NOx, and their efficiency. Therefore, the evaporation of liquid fuel droplets impinging on hot surfaces has become an important subject of interest to engine designers, manufacturers, and researcher...

Emission samples were obtained from two medium-sized power plants, one fired with oil and the other with pulverized coal. Particles obtained by a miniscale plume stack gas sampler (MIPSGAS), simulating the dilution process in the plume, were subjected to detailed physical, chemical and biological characterization. Studies by scanning electron microscopy and by Coulter counter demonstrated that ...

INTRODUCTION Microalgae comprise a vast group of photosynthetic, auto/heterotrophic organism which has an extraordinary potential for cultivation as energy crops. These microscopic algae use photosynthetic process similar to that of higher-developed plants. They are veritable miniature biochemical factories, capable of regulating carbon dioxide (CO ), just like terrestrial plants [1]. In additi...

Combustion-tube tests were conducted on a tar of physical and chemical characteristics similar to a natural reservoir tar. Ottawa sand of 20-30 mesh size was used to prepare tar-sand mixtures of about 37% porosity, 19 to 25% water saturation and 21 to 32% tar saturation. In runs with distilled water, a combustion front was successfully initiated and moved into the sand pack. Later, however, the...

CI engines are widely used in stationary as well as mobile applications. Stationary applications include typical gen-set, etc. and mobile applications include heavy automobiles, forestry equipments, etc. as well as other applications in day-to-day life. Since the turbulence is necessary for better mixing and the fact that it can be controlled by shape of the combustion chamber, makes this revie...