Modeling of crack propagation by a finite element method under mixed mode conditions is of prime importance in the fracture mechanics. This article describes an application of finite element method to the analysis of mixed mode crack growth in linear elastic fracture mechanics. Crack - growth process is simulated by an incremental crack-extension analysis based on the maximum principal stress c...

This paper investigates the roles of external loads and specimen geometry on crack path selection in adhesively bonded joints. First, the effect of mixed mode fracture on crack path selection is studied. Using epoxy as an adhesive and aluminum as the adherends, double cantilever beam (DCB) specimens with various T-stress levels are prepared and tested under mixed mode fracture loading. Post-fai...

Zirconia-nickel functionally graded materials were obtained by powder metallurgy technique. The microstructure, residual stress, fracture toughness and Vickers hardness were investigated. Mixed-mode fracture response of YSZ /Ni functionally graded materials was examined utilizing the three point bending test and finite element method (Cosmos/M 2.7). The results show that the stress intensity fac...

In this study, a novel numerical method is proposed for determination of mode-I interlaminar fracture toughness, GIc, in multi-directional (MD) double cantilever beam (DCB) specimens using fracture properties of unidirectional DCB specimens. Two factors, β and Dc are defined to minimize the undesirable effects on strain energy release rate. β describes the difference between maximum and average...

Traction–separation relations can be used to represent the adhesive interactions of a bimaterial interface during fracture. In this paper, a direct method is proposed to determinemixed-mode traction– separation relations based on a combination of global and local measurements including load-displacement, crack extension, crack tip opening displacement, and fracture resistance curves. Mixed-mode...

introduction: the aim of the present study was to evaluate the effect of three types of luting cements used for post cementation on the fracture resistance of endodontically treated maxillary premolars, restored with resin composite. materials and methods: one hundred intact single-rooted human maxillary premolars were randomly divided into 5 groups of 20 each. in groups 2-5, post spaces were p...

A numerical study of the elastic-plastic mode-II fracture of adhesive joints is presented in this paper. A traction-separation law was used to simulate the mode-II interfacial fracture of adhesively-bonded end-notched flexure (E.N.F.) specimens loaded in three-point bending, with extensive plastic deformation accompanying failure. The fracture parameters for the traction-separation law were det...

This paper contains a theoretical formulation of multiple interface cracks in two bonded dissimilar half planes subjected to in-plane traction. The distributed dislocation technique is used to construct integral equations for a dissimilar mediums weakened by several interface cracks. These equations are of Cauchy singular type at the location of dislocation, which are solved numerically to obta...