Effects of rapid heat transfer using a fluidized bed on the heat-treating response of Al-Si-Mg alloys (both unmodified and Sr modified) were investigated. The heating rate in the fluidized bed is greater than in conventional air convective furnaces. Particle size analyses of eutectic Si showed that the high heating rate during fluidized bed solution heat treatment causes faster fragmentation an...

Intermittent drying is a satisfactory technique for drying of heat sensitive grains especially rough rice. This method consists of two separate stages applied intermittently: drying and tempering. In this work, intermittent drying of rough rice is investigated both theoretically and experimentally. In order to characterize this process; a multi-scale model consisting of macroscopic and microsco...

Introduction Understanding the jetting phenomena near the gas distributor plate in a fluidized bed is important to gassolids mixing, heat and mass transfer, and erosion on any bed internals, which can all affect the performance of the bed. Moreover, acoustic vibration in a fluidized bed can be used to enhance the fluidization quality of particulate matter. Visualizing the jetting structure usin...

Spirals as internals are utilized to reduce the axial mixing of solids in fluidized beds, by routing the solids flow in a predetermined route or by localizing the solids mixing. The drying kinetics of continuous fluidized bed with and without internals has been compared and modeled using batch drying kinetics and residence time distribution analysis. The batch drying experiments were conducted ...

The hydrodynamic studies of fluidized bed reactor has been reported in terms of pressure drop, minimum fluidization velocity and bed volume expansion to contribute to the optimization of the CNTs production parameters in fluidized bed reactors. Minimum fluidization velocity and pressure drop, as the most important parameters, were taken into account for the investigation of the hydrodynamic beh...

−The information of particle cluster dynamics is necessary for improving the performance of a circulating fluidized bed system. The main objective of this study is to compare the particle cluster diameters and concentrations from computational fluid dynamics simulation results between circulating fluidized bed riser and downer. The calculation methodologies are based on the concept of kinetic t...

High temperature Fischer-Tropsch synthesis process use fixed fluidized bed as a reactor. In order to understand the flow behavior in the fluidized bed better, the research of how the radial velocity affects the entire flow field is necessary. Laser Doppler Velocimetry (LDV) was used to study the radial velocity distribution along the diameter direction of the cross-section of the particle in a ...