The mechanical properties of barnacle base plates were measured using a punch test apparatus, with the purpose of examining the effect that the base plate flexural rigidity may have on adhesion mechanics. Base plate compliance was measured for 43 Balanus amphitrite (=Amphibalanus amphitrite) barnacles. Compliance measurements were used to determine flexural rigidity (assuming a fixed-edge circu...

This study evaluated the tensile and flexural strength of tungsten inert gas (TIG) welds in specimens made of commercially pure titanium (CP Ti) compared with laser welds. Sixty cylindrical specimens (2 mm diameter x 55 mm thick) were randomly assigned to 3 groups for each test (n=10): no welding (control), TIG welding (10 V, 36 A, 8 s) and Nd:YAG laser welding (380 V, 8 ms). The specimens were...

This study aimed to investigate the effect of aggressive environment on the flexural properties of halloysite nanotubes-polyester nanocomposites. Results showed that the addition of halloysite nanotubes into polyester matrix was found to improve flexural properties of the nanocomposites in dry condition and after water-methanol exposure. Significant increase in surface roughness was also observ...

OBJECTIVES The aim of this study was to investigate the ultrastructure and resistance to fracture of eight different types of fiber post, and to verify the existence of a correlation between structural characteristics and flexural strength. METHODS Eight types of fiber post were selected for this study. Fiber Kor (Jeneric-Pentron), Para Post Fiber White (Colténe), Luscent Anchor (Dentatus), T...

During flight, many insect wings undergo dramatic deformations that are controlled largely by the architecture of the wing. The pattern of supporting veins in wings varies widely among insect orders and families, but the functional significance of phylogenetic trends in wing venation remains unknown, and measurements of the mechanical properties of wings are rare. In this study, we address the ...

Many structures are often prone to bending loads, which can result in serious damage. Therefore, for structural integrity, structures must be efficient to resist bending. Flexural loading causes stresses in the composites, which vary through the thickness. These flexural stresses are the maximum at the outer surfaces and zero in the middle at the neutral axis. In pure bending, the composite fai...

STATEMENT OF PROBLEM Provisional prostheses are subject to flexure under function. Selection of the appropriate material for their fabrication is difficult given the limited evidence-based information on the flexural strength of provisional resins. PURPOSE This study compared the flexural strength of 5 methacrylate-based resins and 8 bis-acryl resins used to fabricate provisional crowns and f...

The purpose of the present study was to evaluate the relationships among three flexural strengths of recent dental ceramics using 3-point and 4-point bending tests and biaxial flexural test. Three brands of porcelain for veneering (d.SIGN, Supper porcelain AAA, Vintage Hallo), two injectable ceramics (Empress 2, OPC 3G), and one castable ceramic (Crys-Cera) were used. Twenty bar-shaped and 10 d...

PURPOSE This study evaluated the degree of conversion (DC) of four indirect resin composites (IRCs) with various compositions processed in different polymerization units and investigated the effect of thermal aging on the flexural strength and Vicker's microhardness. MATERIALS AND METHODS Specimens were prepared from four IRC materials, namely Gr 1: Resilab (Wilcos); Gr2: Sinfony (3M ESPE); G...

BACKGROUND Comedones are usually found in acne and involve the seborrheic areas of the skin. Disseminated comedones can be found in other skin disorders. Flexural comedones are characterized by double orifices connected by a thin layer of epidermis that reveals the comedo content below it. To the best of our knowledge, flexural comedones have not been previously described as an entity. Our obje...