_____________________________________________________________ Different catalysts based on Y-zeolite, ZSM-5 and amorphous kaolin were prepared and characterized. The catalytic cracking of 1,3,5-triisopropylbenzene (1,3,5-TIPB), 1,4diisopropylbenzene (1,4-DIPB) and n-dodecane were used to investigate the effect of catalyst nature on the catalytic performance. Cracking the largest molecule (1,3,5...

The varestraint cracking test was carried out to assess the hot cracking tendency of alloy 800 at different welding conditions and augmented strain levels. The test results revealed that the hot cracking susceptibility of alloy 800 increases with increasing the heat input and augmented strain levels. This emphasizes the role of constraint either internally induced or externally applied to the w...

In support of the initiatives for implementing the new MechanisticEmpirical Pavement Design Guide (MEPDG) in Iowa, a preliminary sensitivity study was undertaken to assess the comparative effect of design input parameters pertaining to material properties, traffic and climate on performance of two existing flexible pavements in Iowa with relatively thick Asphalt Concrete (AC) layers. A total of...

Abstract A very common method to predict the reliability of components soldered on printed circuit board (PCB) or substrates is by bending tests and temperature cycle tests, for instance between 55 °C and 125 °C (up to 2000 cycles at 1 h cycle period). Sensitive SMD constructions such as chips with ball grid array mounting or multilayer chip capacitors (MLCC) are often a major issue due to thei...

There are three areas to consider when designing/implementing wire bonding to advanced ULSI damascene–copper chips having copper metallization and low dielectric-constant polymers embedded beneath them (Cu/LoK). These are: 1) the copper-pad top-surface oxidation inhibitor coatingmetal/organic/inorganic. (Current work involves evaluating the metal and inorganic options); 2) the low dielectric co...

We measured the contact areas and contact stresses at the post-cam mechanism of a posterior-stabilised total knee arthroplasty when a posterior force of 500 N was applied to the Kirschner Performance, Scorpio Superflex, NexGen LPS Flex Fixed, and NexGen LPS Flex Mobile knee systems. Measurements were made at 90 degrees, 120 degrees, and 150 degrees of flexion both in neutral rotation and 10 deg...

CADAL has been open to the public for more than two years. We have received a lot of positive feedbacks to improve the usability of CADAL portal. In this paper, we present our works in improving the usability of book search, reading and reporting services in CADAL portal. First, we present a quick book search application whose effective hybrid ranking mechanism combines content similarities wit...

because thin plate reinforced concrete members such as walls and slabs are greatly influenced by the drying shrinkage, cracks can occur in these members due to the restraint of the volume change caused by drying shrinkage. therefore, the control of cracking due to drying shrinkage is very important in building construction that the thin plate members are frequently used. however, few researches...

Cline, J. A. and Trought, M. 2007. Effect of gibberellic acid on fruit cracking and quality of Bing and Sam sweet cherries. Can. J. Plant Sci. 87: 545–550. Rain-induced cracking of sweet cherries (Prunus avium L.) is a major problem in many cherry growing regions throughout the world. One method to reduce cracking is to grow cracking resistant cultivars; however, no completely effective control...