In the present work Taguchi method is used to optimize cutting parameters during dry turning of AISI 304 austenitic stainless steel with AlTiCrN coated tool. The coating was deposited on fine-grained K-grade (ISO K-20) cemented carbide cutting insert using physical vapor deposition (PVD) technique. The turning parameters evaluated are cutting speed of 200 and 260 m/min, feed rate of 0.20 and 0....

Noteworthy results have been obtained in the turning and drilling of hardened high-strength steels using tungsten carbide based cutting tools. In a finish turning process, it was seen that surface roughness and tool flank wear followed very different trends against cutting time. The suggested explanation for this behaviour is that the profile cut into the workpiece surface is determined by the ...

The purpose of this research paper is to study the tool wear and surface roughness of AISI 8620 material using coated ceramic tool by turning process. Ceramic cutting tools have outstanding material hardness, resistance to high temperatures, wear resistance, chemical stability and hot hardness. Ceramic tool with Al2O3 + TiC (golden) coating was used to investigate the surface roughness and tool...

The application of conventional cutting fluids in machining operations is harmful and not eco-friendly. In this context, the present work focuses on environmental friendly cutting fluids such as vegetable oil based cutting fluids (VBCFs). The objective of this work is to determine the influence of vegetable oil based cutting fluids (sesame and coconut oil) with extreme pressure (EP) additive on...

The present work deals with developing a fuzzy back propagation neural network scheme for prediction of drill wear. Drill wear is an important issue in the manufacturing industries, which not only affects the surface roughness of the hole but also influences the drill life. Therefore, replacement of drill at an appropriate time is of significant importance. Flank wear in a drill which depends u...

Gear contact surface wear is one of the important failure modes in gear systems. The procedure implemented in this work includes finite element multi pair contact modeling to predict the load sharing between the simultaneously contacting pairs and mathematical programming method to estimate the gear surface wear in high contact ratio gear drives for particular number of cycles. A method to find...

On time replacement of a cutting tool with a new one is an important task in Flexible Manufacturing Systems (FMS). A fuzzy logic-based approach was used in the present study to predict and simulate the tool wear progress in turning operation. Cutting parameters and cutting forces were considered as the input and the wear rate was regarded as the output data in the fuzzy logic for construct...

The wear of star wheel teeth is an importance issue in the single screw compressor. In order to enhance the wearresistance of star wheel teeth, some new profiles of the meshing pair were proposed to replace the currently used straight line envelope profile, such as single column envelope, multi-straight line (or multi-column) envelope. In this paper, a curved surface of the tooth flank is sugge...

Cutting tool wear is a critical phenomenon which influences the quality of the machined part. In this paper, an attempt has been made to create artificial flank wear using the electrical discharge machining (EDM) process to emulate the actual or real flank wear. The tests were conducted using coated carbide inserts, with and without wear on EN-8 steel, and the acquired data were used to develop...