S Jacketing technology using fiber reinforced polymer (FRP) composites is being applied for seismic retrofit and rehabilitation of reinforced concrete (RC) columns designed and constructed under older specifications. In this study, the authors develop an electromagnetic (EM) imaging technology for detecting such damage as voids and debonding between the jacket and the column, which may signific...

Thin laminates made of high-strength pultruded fiber reinforced polymers (FRP) have been developed to reinforce gluelaminated timber (glulam) beams. The FRP reinforced glulams are significantly stiffer, stronger, and have less variation in bending strength than a conventional (unreinforced) glulam of equal size. Following the technical development and model building code approval of design proc...

The strengthening of concrete structures externally bonded with fiber reinforced polymer (FRP) sheet is increasingly being used for repair and rehabilitation of existing structures. This paper provides information in the area of long-term durability of FRP-concrete interface externally bonded with FRP composite sheet. It mainly discusses and summarizes the influence of harsh environmental expos...

Many existing reinforced concrete structures were constructed with substandard characteristics. Low quality concrete, poor transverse reinforcement details and insufficient flexural strength are among the most common deficiencies. While substandard structures are in need of retrofitting, particularly in seismic areas, problems such as high costs and disturbance to occupants are major obstacles ...

Fibre reinforced polymer (FRP) is one of the best retrofitting materials for strengthening due to a number of advantages, such as excellent strength to self-weight ratio, large fatigue resistance capacity, etc. Presently, many different types of FRP models are used in analysis, thereby creating erroneous analytical results. Reinforced concrete (RC) beams with carbon and glass fibrereinforced po...

Many materials are gradually softened with increasing temperatures in the fire, which will cause severe damage. As a new fiber-reinforced polymer (FRP) composite, change mechanical properties of nanometer montmorillonite composite bars or plates at elevated has not been investigated. To obtain more comprehensive study FRP composites high temperatures, experimental research on fiber material und...

4 FRP strengthening systems for infill masonry walls are typically designed to resist flexural stresses due to out-of5 plane pressure. Previous research has shown that there are potential premature failure mechanisms due to shear 6 sliding of the infill, which could reduce the effectiveness of the strengthening system. Current design guidelines for 7 strengthening of masonry walls with fiber-re...

This paper describes an experimental program that deals with retrofitting of infill un-reinforced masonry walls (URM) with Fiber Reinforced Polymer (FRP). The primary objective of this research is to develop a retrofit strategy that while economical will minimize the influence of the retrofit on the overall performance of structural frames in predominant seismic regions. Allowing some damage to...

Corrosion of steel reinforcement is one of the main durability problems facing reinforced concrete infrastructures worldwide. This paper will summarize the results of a multi-phase experimental program undertaken at the University of Waterloo to investigate the viability of using externally bonded fiber reinforced polymer (FRP) laminates to rehabilitate corrosion-damaged reinforced concrete bea...

In recent years, even if Fiber Reinforced Polymer (FRP) composites have been widely used for strengthening of civil buildings, a new generation of materials has been studied and proposed for historical masonry construction. These buildings, mainly made of stone work, are common in many areas of Europe and Asia and recent earthquakes has been the cause of many catastrophic failures. The brittlen...