It is an effective way to improve the flexural behavior of reinforced concrete (RC) members by externally bonded carbon fiber reinforcement polymer (CFRP) laminates on the soffit of the members. However, there is little investigation on flexural performance of RC beam flexurally strengthened by side-bonded FRP laminates. To investigate the flexural behavior of RC beams side-bonded CFRP laminate...

Sandwich construction is widely accepted as a method of construction especially in the aircraft industry. It is a type of stressed skin construction formed by bonding two thin faces to a thick core, the faces resist all of the applied edge loads and provide all or nearly all of the required rigidities, the core spaces the faces to increase cross section moment of inertia about common neutral ax...

A computational model of ultrasound scattering by micro-cracks in fiber reinforced polymer laminates is presented, foundational to study of micro-crack induced ultrasound attenuation. A model for transmission scattering response is developed using a boundary integral formulation, and associated approximate scattering theories are discussed. Numerical results are presented demonstrating applicat...

In this study, compressive strength and contraction of Polymer Composite Laminates made of E-Glass / Carbon bi-woven fabric reinforced in Epoxy resin matrix has been evaluated experimentally. Composite laminates were fabricated using hand lay-up technique for different ply orientations of 0,30,45,60 and stacking sequence of (00/300/450/600)2S for 2 and 3 mm laminate thickness. The laminates wer...

GLARE (GLAss REinforced) belongs to a family of fibre-metal laminates currently being used as a skin material for the upper and side shells in the forward and rear fuselage body of A380. This composite material consists of thin layers of aluminium sheets and unidirectional prepreg layers of glass fibres embedded into an epoxy based matrix. GLARE demonstrates excellent resistance to fatigue crac...

Cross-ply laminates reinforced with basalt fibers and functionalized multi-walled carbon nanotubes (MWCNTs) were fabricated from unidirectional epoxy prepregs. MWCNTs with varied surface conditions were prepared by oxidization or esterification, and then dispersed into a DGEBA epoxy system. The dispersion of the MWCNTs in the epoxy was improved by surface modification, resulting in improved com...

In this article, hybrid composite laminates with shape memory alloy (SMA) and glass fiber (GF) as the reinforced phase, and epoxy resin as the host material, were manufactured by vacuum-assisted resin injection (VARI) processing. The SMA wires were embedded into the GF/epoxy composites with three kinds of modes. The effect of SMA content and the position on the flexural, low-velocity impact per...

In this paper, we present an improved FBG sensor system using a wavelength swept fiber laser(WSFL) for internal strain monitoring of composite laminates. The WSFL provides unique and functional output characteristics useful for sensor interrogation. In addition a realtime signal processing program was made to measure strains. Five FBG sensors in an optical fiber were used to measure internal st...

Abstract. Matrix accumulations, buckling and tearing of fibers metal sheets are common defects in the deep drawing fiber laminates. The previously developed in-situ hybridization process is a single-step method for manufacturing three-dimensional laminates (FML). During FML, low-viscosity thermoplastic matrix injected into dry glass fabric layer using resin transfer molding process. concurrent ...