this research investigates the effect of the post-cure time on the residual stresses in laminated composites. laminated composites were made of t300 carbon fibers and epoxy resin. the post-cure process was carried out at the constant temperature of 120 °c for 6 and 12 hours for two specimens. the slitting method was employed to determine through-thickness residual stress distribution of the com...

fourier transform infrared (ftir) and gel permeation chromatography (gpc) wre respectively utilized in determining the changes in isocyanate (nco) concentration and molecular weight (mw) and its distribution (mwd) in polyurethanes during their cure and postcure stages. samples, originally cured at 45°c, were taken through accelerate aging tests at various temperatures. the ftir and gpc analytic...

since reusing waste tire as a cheap filler is considerably high, in this study, recycled rubber to replace nr/br is used up to 15 phr and the positive and negative aspects of the rubber powder and reclaimed rubber in the physical, dynamical and processing properties are evaluated. the results showed that in the presence of recycled rubber, the cure rate, crack growth resistance, tear strength a...

background: breast cancer is the most common cancer after lung cancer and the second cause of death. in this study we compared weibull and lognormal cure models with cox regression on the survival of breast cancer. study design: a cohort study. methods: the current study retrospective cohort study was conducted on 140 patients referred to ali ibn abitaleb hospital, rafsanjan southeastern iran f...

In the present study, a coupled 3D transient thermo-chemical analysis together with 2D plane strain mechanical is carried out for pultrusion process. For analysis, cure hardening instantaneous linear elastic (CHILE) approach used of thin beam profile made glass fibre and epoxy resin. The applied efficient fast to investigate residual stresses deformations distributions temperature degree obtain...

depth of cure of composite material is restricted and it depends on many parameters such as thickness. the aim of this in-vitro study was to evaluate the depth of cure of two light-cured core build-up composites (quixfil and photocore) in different thicknesses, when cured for 60 seconds.the vickers microhardness measurements were made for each side of the top irradiated surfaces of 1,2,3,4,5,6,...

statement of problem: for many years, application of the composite restoration with a thickness less than 2 mm for achieving the minimum polymerization contraction and stress has been accepted as a principle. but through the recent development in dental material a group of resin based composites (rbcs) called bulk fill is introduced whose producers claim the possibility of achieving a good rest...

The present paper deals with an improvement of efficient and accurate numerical flux schemes for the hyperbolic conservation laws of aerodynamics. Due to numerical approximation and linearization, many flux schemes suffer shock instability and unwanted oscillations. The proposed schemes, called AUSMPW+ and RoeM, cure these problems and numerical tests show the robustness, accuracy and efficienc...