Abstract: Austenitic stainless steels exhibit a low hardness and weak tribological properties. The wear behaviour of austenitic stainless steel AISI 316 was evaluated through the pin on disc tribological method. For investigating the effect of wear on the changes in microstructure and resistance to wear, optical microscopy and scanning electron microscope were used. The hardness of the worn...

the vehicle braking system is considered to be one of the most fundamental safety-critical systems in modern vehicles, as its main purpose is to stop or decelerate the vehicle. the frictional heat generated during braking application can cause numerous negative effects on the brake assembly, such as brake fade, premature wear, thermal cracks and disc thickness variation. in the past, surface ro...

polyvinyl ester green composites were synthesized with walnut shell powder (wsp) by in-situ polymerization technique. the green composites have been evaluated for mechanical properties such as tensile strength, tensile modulus and hardness. sliding wear loss, specific wear rate and coefficient of friction were investigated by using computerized pin-on–disc machine at normal applied loads of 20,...

aa8090 is an extra light and deformable group of lithium containing aluminum alloys which have recently replaced some aerospace aluminum alloys, such as 2000 and 7000 series, due to their higher elastic modulus and lower specific weight. in this study, aa8090 matrix composites containing 3, 6 and 9 vol.% sic were cast using a modified stir casting method. the casting billets were deformed thoug...

statement of problem: as a physical property, wear resistance of the materials used in the fabrication of orthodontic retainers play a significant role in the stability and long term use of the appliances. objectives: to evaluate the wear resistance of two commonly used materials for orthodontic retainers: acropars op, i.e. a polymethyl methacrylate based material, and 3a-gs060, i.e. a polyethy...

Wear experiments have shown that when the applied normal stress exceeds a critical value, a transition occurs from the regime of mild wear to that of adhesive wear. As a result, the wear rate of particle-reinforced aluminium composites increases by a hundred-fold. Based on dislocation and delamination theories, a criterion is proposed for determining the critical transition load, and a quantita...

Polyvinyl ester green composites were synthesized with walnut shell powder (WSP) by in-situ polymerization technique. The green composites have been evaluated for mechanical properties such as tensile strength, tensile modulus and hardness. Sliding wear loss, specific wear rate and coefficient of friction were investigated by using computerized pin-on–disc machine at normal applied loads of 20,...

functionally graded aluminium/zirconia metal matrix composite was fabricated using stir casting technique followed by horizontal centrifugal casting process and a hollow cylindrical functionally graded composite (150 x 150 x 16 mm) was obtained with centrifuging speed of 1200 rpm. the microstructural evaluation and hardness test was carried out on the outer and inner surface of the functionally...