In this study, a large number of creep tests were carried out to study the effect of stress level and testing temperature on the creep behavior of 63 Sn/37Pb solder in a systematic manner. Based on the dislocation controlled creep mechanism and Gibbs’ free-energy theory, a new creep constitutive model was proposed. The model was found to describe accurately the creep flow of the solder and to b...

From decades Creep has been known and studied for textile materials. In comparison, a newly observed phenomenon of inverse creep seems not to have received much attention. A new instrument has been fabricated to measure creep and inverse creep in textile materials particularly yarns. Creep and Inverse creep measurements of few of the textile yarns like nylon multifilament yarn, Polyester multif...

Commercial zirconium carbide (ZrC) powder is consolidated by Spark Plasma Sintering (SPS). Processing temperatures range from 1650 to 2100 °C. Specimens with various density levels are obtained when performing single-die SPS at different temperatures. Besides the single-die tooling setup, a double-die tooling setup is employed to largely increase the actual applied pressure to achieve higher de...

Creep deformation and rupture experiments are conducted on samples of the Ni-base superalloy directionally solidified GTD-111 tested at temperatures between 649°C and 982°C and two orientations (longitudinally and transversely oriented). The secondary creep constants are analytically determined from creep deformation experiments. The classical Kachanov–Rabotnov model for tertiary creep damage i...

This paper characterized bovine extraocular muscles (EOMs) using creep, which represents long-term stretching induced by a constant force. After preliminary optimization of testing conditions, 20 fresh EOM samples were subjected to four different loading rates of 1.67, 3.33, 8.33, and 16.67%/s, after which creep was observed for 1,500 s. A published quasilinear viscoelastic (QLV) relaxation fun...

The creep behavior of bagasse-based composites with virgin and recycled polyvinyl chloride (B/PVC) and high density polyethylene (B/HDPE) as well as a commercial wood and HDPE composite decking material was investigated. The instantaneous deformation and creep rate of all composites at the same loading level increased at higher temperatures. At a constant load level, B/PVC composites had better...

Long term tensile creep studies were conducted on binary NiAl in the temperature range 700-1200 K with the objectives of characterizing and understanding the creep mechanisms. Inverse and normal primary creep curves were observed depending on stress and temperature. It is concluded that the primary creep of NiAl is limited by dislocation mobility. The stress exponent for creep, n, decreased fro...

Polypropylene is one of the most common, fastest growing and versatile thermoplastics currently used to produce tanks and chemical piping systems. Even at room temperature creep is considerable for polypropylene products. The creep behavior of strains, stresses, and displacement rates is investigated in a thick-walled cylinder made of polypropylene reinforced by functionally graded (FG) multi-w...

This study was conducted with grazing nursing calves (197 kg) to determine the effects of 1) limiting creep feed intake and 2) increasing the concentration of ruminal escape CP in creep feed at a limited level of creep feed intake on fescue and milk intake, ruminal NDF digestion, and total tract digestibility in calves fed high-quality, freshly harvested fescue. The treatments were 1) control (...

The ac susceptibility of a superferromagnetic discontinuous multilayer [Co(80)Fe20(1.4 nm)/Al(2)O3(3 nm)](10) is measured as a function of temperature, frequency, and field amplitude and compared to static and dynamic hysteresis loops. Its properties are successfully mapped onto the predicted [T. Nattermann, V. Pokrovsky, and V. M. Vinokur, Phys. Rev. Lett. 87, 197005 (2001)]] dynamical phase t...