Fatigue is the major threat in service of steel structure subjected to fluctuating loads. With the additional effect of corrosion and presence of weld joints the fatigue failure may become more critical in structural steel. One of the apt examples of such structural is the sailing ship. This is experiencing a constant stress due to floating and a pulsating bending load due to the waves. This pa...

Introduction: The evolution of third and fourth generation linked, semi-constrained total elbow replacements (TER) have employed an increasing use of modularity to facilitate component linkage and inter-operative flexibility. In general, modular connections (MC) used in orthopedic devices may carry inherent risks of adverse events resulting from component fracture, loosening, micromotion, frett...

In the paper, genetic algorithm is introduced in the study of network authority values of BP neural network, and a GA-NN algorithm is established. Based on this genetic algorithm-neural network method, a predictive model for fatigue performances of the pre-corroded aluminum alloys under a varied corrosion environmental spectrum was developed by means of training from the testing dada, and the f...

Risk Based Inspection (RBI) has been used for some time to optimise inspection schedules based on assessing the risk of various corrosion related degradation mechanisms. However, one degradation mechanism that has been traditionally overlooked is that of vibration induced fatigue. A proactive methodology for assessment of vibration induced fatigue was published in 2000 as part of a Joint Indust...

Compression springs were prepared from Cr-Si high strength spring steel and coated with pure Zn and ZnNi by electroplating process. The effect of baking after electroplating as well as applying an electroless nickel interlayer on the fatigue and fatigue corrosion of the springs was investigated. The results were analyzed using weibull statistical model. A considerable improvement (8%) in fati...

In this study, X-ray fractography’)-‘) technique was applied to the (GZ+~) dual phase stainless steel. Effect of the rolling direction on fatigue properties was discussed. Residual stress near the surface was measured by using X-ray diffraction method to the depth direction. Relations between X-ray parameter and fracture mechanics parameter were examined. As the result, distribution of the phas...

The fatigue properties of ultrathin protective coatings on silicon thin films were investigated. The cohesive and delamination fatigue properties of 22 nm-thick atomic-layered-deposited (ALD) titania were characterized and compared to that of 25 nm-thick alumina. Both coatings were deposited at 200 °C. The fatigue rates are comparable at 30 °C, 50% relative humidity (RH) while they are one orde...

to be published in Zeitschrift fuer Anorganische und Allgemeine Chemie. (b) Vladimir Balek, “Rare-Gas Diffusion, Reactivity and Electrical Conductivity of Solid ZnO”; to be published in Physica Status Solidi. l2 J. Beretka and M. J. Ridge, “Formation of Zinc Ferrite at Low Temperatures,” Nature (London), 216 [5114] 473-74 (1967). l3 Vladimir Balek. “Emanation Method for Estimating Reactivity of...