Some applications in microelectronics call for freestanding polyimide films with fine metallic wiring patterns that are thinner than commercially available copper-clad polyimide sheets, which are typically greater than 25 pm in thickness. This work describes a laserassisted technique to fabricate freestanding multilayer thin-film wiring with polyimide dielectric insulating layers that are less ...

This research focused on the preparation and characterization of Cu@N-TiO2/Ti (N-TiO2/Ti decorated with Cu) thin film electrode and its activities test in photoelectrocatalytic system. This study investigated the time effect of Copper (Cu) electrodeposition and the concentration of nitrogen (N) in the photocatalytic characteristics of TiO2. The catalyst has been prepared for activities test on ...

A thin film coating of titanium nitride was applied to the surface of rf cavity tuners to reduce secondary electron generated when the existing copper base material is in place. The tuners are used in high-field gradients, where electron heating of the tuner is a problem. By reducing the generation of electrons the temperature of the tuners will be reduced, for better reliability. This paper co...

AlN thin film was prepared over different metal substrates using DC sputtering at various sputtering parameters. The XRD spectra revealed the presence of mixed (cubic and hexagonal) phases for all samples other than samples prepared at 300W with Ar:N2 gas ratio of 14:6. The intensities of cubic phases observed at copper (Cu) substrates increased drastically with high sputtering power and N2 gas...

The effect of film thickness on the resistivity of thin, evaporated copper films (approximately 10–150 nm thick) was determined from sheet resistance, film thickness, and mean grain-size measurements by using four-point probe, profilometer, and electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) methods, respectively. The resistivity of these films increased with decreasing film...

We study the roughening process and morphology transition of organic semiconductor thin film induced by molecular orientation in the model of molecular semiconductor copper hexadecafluorophthalocyanine (F16CuPc) using both experiment and simulation. The growth behaviour of F16CuPc thin film with the thickness, D, on SiO2 substrate takes on two processes divided by a critical thickness: (1) D ≤ ...

Control over assembly, orientation, and defect-free growth of metal-organic framework (MOF) films is crucial for their future applications. A layer-by-layer approach is considered a suitable method to synthesize highly oriented films of numerous MOF topologies, but the initial stages of the film growth remain poorly understood. Here we use a combination of infrared (IR) reflection absorption sp...

We developed a new method of fabricating a divalent copper ion (Cu(2+)) modified DNA thin film on a glass substrate and studied its magnetic properties. We evaluated the coercive field (Hc), remanent magnetization (Mr), susceptibility (χ), and thermal variation of magnetization with varying Cu(2+) concentrations [Cu(2+)] resulting in DNA thin films. Although thickness of the two dimensional DNA...

Terahertz (THz) transmission spectroscopy is used to measure the oxidation kinetics of copper thin films evaporated on silicon substrates. The transmission of broadband THz pulses from 1 to 7 THz through the copper film is measured while it gets oxidized at an elevated temperature in ambient air. The change in the transmitted THz electric field is correlated with the growth of the cuprous oxide...

The molecular dynamic technique was used to simulate the nano-indentation test on the thin films of silver, titanium, aluminum and copper which were coated on the silicone substrate. The mechanical properties of the selected thin films were studied in terms of the temperature. The temperature was changed from 193 K to 793 K with an increment of 100 K. To investigate the effect of temperature on...