نتایج جستجو برای: confining stress
تعداد نتایج: 443240 فیلتر نتایج به سال:
Most soil mechanics theories are limited to strain hardening and shrinkage under high compressive stresses, there some shortcomings in the selection of suction or degree saturation as water content state varies constitutive models unsaturated soil. Based on triaxial shear tests compacted (a silt plasticity) with different confining pressure (low-confining), a dilatancy model based mass is propo...
In this paper, the mechanical behavior of plastic concrete being used in the cut-off walls of earth dams has been studied. To do the task, triaxial compression tests on the specimens in various ages and mix designs under different confining pressures have been done and the stress-strain behavior of such materials and their strength parameter changes has been experimentally investigated. It has ...
Artificial cemented sand test samples were prepared by using ordinary Portland cement (OPC) as the cementing agent. Through uniaxial compression tests and consolidated drained triaxial compression tests, the stress-strain curves of the artificial cemented sand with different cementing agent contents (0.01, 0.03, 0.05 and 0.08) under various confining pressures (0.00 MPa, 0.25 MPa, 0.50 MPa and ...
A simple formalism is presented to model the behaviour of expansive clays. Two levels of structure are considered. The behaviour of the macrostructure follows the model developed for unsaturated materials by Alonso et al. [Géotechnique 40 (3) (1990) 405–430]. The behaviour of the microstructure is adapted from the work of Gens and Alonso [Can. Geotech. J. 29 (1992) 1013–1032] in order to includ...
The hydrothermal diamond-anvil cell (HDAC) was employed as a pressurized fluid inclusion heating stage to determine temperatures of phase transitions in synthetic fluid inclusions in quartz. Using this technique, the common problem of decrepitation or stretching of inclusions having high internal pressures was eliminated. Homogenization temperatures of pure H2O synthetic inclusions determined i...
Uniaxial quasi-static, uniaxial dynamic and confined dynamic compression experiments have been performed to characterize the failure and deformation mechanisms of a sintered polycrystalline aluminum nitride using a servohydraulic machine and a modified Kolsky bar. Scanning electron microscopy and transmission electron microscopy (TEM) are used to identify the fracture and deformation mechanisms...
Salt crystallization is a major cause of weathering of rocks, artworks and monuments. Damage can only occur if crystals continue to grow in confinement, i.e. within the pore space of these materials, thus generating mechanical stress. We report the direct measurement, at the microscale, of the force exerted by growing alkali halide salt crystals while visualizing their spontaneous nucleation an...
Molecular dynamics simulations were carried out to investigate the pressure dependence of homogeneous defect nucleation behavior in bcc Mo. The crystal was sheared on the ð1 10Þ 1⁄211 1 slip system under different confining pressures. The defect nucleation stress was found to increase as the confining pressure increases. Dislocation loop was nucleated when sheared under hydrostatic compression,...
Laser shock processing (LSP) is an innovative surface treatment technique with high peak power, short pulse, and cold hardening for strengthening metal materials. LSP is based on the application of a high intensity pulsed laser beam (I > 1 GW/cm(2); t < 50 ns) at the interface between the metallic target and the surrounding medium (a transparent confining material, normally water) forcing a sud...
Solid stress and tissue stiffness affect tumour growth, invasion, metastasis and treatment. Unlike stiffness, which can be precisely mapped in tumours, the measurement of solid stresses is challenging. Here, we show that two-dimensional spatial mappings of solid stress and the resulting elastic energy in excised or in situ tumours with arbitrary shapes and wide size ranges can be obtained via t...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید