Cement substitution in self compacting concrete (SCC) is emphasized to conserve environment, reduce cost and utilize waste materials. This paper focuses on comparing the permeability and drying shrinkage of SCC containing Wollastonite micro fiber (WMF), a cheap pozzolanic fiber with respect to flyash. Microsilica was added for providing required viscosity to maintain homogeneity of the mixes. T...

In this research, 210 concrete cube specimens (15cm) were made replacing 0, 5, 10, 15, 20, 25, 30, 35, 40, 50, and 60 percent of slag powder from Isfahan Steel Mill for cement. The control specimens were made with 350 kg/m3 cement content and the water cement ratio in all specimens was 0.51. The Slump value and compressive strength of concrete specimens in 7, 28 and 90 days were obtained and th...

Using nano-technology materials in the asphalt pavement industry is new compared with Portland cement concrete. The main objective of this study is to investigate the effects of nano-silica modification on some properties of a penetration grade asphalt cement and a typical asphalt concrete. 60/70 penetration grade bitumen was modified with different percentages of nano-silica (i.e. 1, 3 and 5%,...

in the current study an experimental/statistical approach addressing key mechanical properties (compressive, tensile and flexural strength) and impact resistance of such new fibers with inclusion of different volume of polyphenylene sulfide (pps) fibers has been carried out on 288 specimens. results from this study revealed that compressive, tensile and flexural strength exhibit a good fit with...

There are different test methods to determine the abrasion resistance of concrete subjected to number of various types of abrasion. There are number of different tests used in various countries and it is clear that there is no single test that adequately measures the abrasion resistance of concrete under all conditions. This paper covers the summary and classification of the various abrasion te...

Glass Fibre Reinforced Concrete is recent introduction in the field of concrete technology. The present day world is witnessing the construction of very challenging and difficult Civil Engineering Structures. Concrete being the most important and widely used material is called upon to possess very high strength and sufficient workability properties. Concrete the most widely used consrtuction ma...

In this research, 210 concrete cube specimens (15cm) were made replacing 0, 5, 10, 15, 20, 25, 30, 35, 40, 50, and 60 percent of slag powder from Isfahan Steel Mill for cement. The control specimens were made with 350 kg/m3 cement content and the water cement ratio in all specimens was 0.51. The Slump value and compressive strength of concrete specimens in 7, 28 and 90 days were obtained and th...