ethanol as a renewable and alternative fuel when utilized in homogeneous charge compression ignition (hcci) has potential to substantially reduce nitrogen oxides (nox) and particle matter (pm) and can maintain hcci sustainability. hcci engine operation is limited between two ringing and misfire regions that too retard and advance combustion phasing highly affect hcci engine operation, performan...

This thesis addresses the problem of combustion control for automotive engines. A method is proposed to complement existing controllers, which use lookup tables based on steady-state operation. During transients, the new control method adjusts fast control variables (ignition or injection time) to compensate for deviations in the cylinder initial conditions from their optimal values due to the ...

The dual fuel engines at part loads inevitably suffer from lower thermal efficiency and higher carbon monoxide and unburned fuel emission. This work is carried out to investigate combustion characteristics of a dual fuel (dieselgas) engine at part loads, using a single zone combustion model with detailed chemical kinetics for combustion of natural gas fuel. The authors developed software in ...

Preliminary communication Spontaneous combustion in coal gangue dumps leads to pollution in the environment and damages ecosystem and human health. Mine operators usually fail to take effective measures against spontaneous combustion because of the inaccurate detection of the location of spontaneous combustion bursts. To address this issue, a control system of spontaneous combustion in coal gan...

the present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. soot concentrations inside the combustor are measured by filter paper technique. the simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and soo...

investigations are carried out to evaluate the performance of a low heat rejection (lhr) diesel engine consisting of air gap insulated piston with 3-mm air gap, with superni (an alloy of nickel) crown and air gap insulated liner with superni insert with different operating conditions of crude jatropha oil with varied injection timing and injection pressure.  performance parameters of brake ther...

investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (lhr) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].the engine had different operating conditions...

To develop the combustion characteristics of aluminum powder in steam, the ignition and combustion process of aluminum powder with different additives (KBH4, ammonium perchlorate (AP) and NaCl) addition at different levels were studied using a transparent pipe furnace. The temperature variation of these samples was measured using a thermocouple, and a high-speed camera was used to record combus...

Pollutant emissions from combustion systems are a major area of concern with today’s energy needs. Numerical simulations have helped with the design of clean and efficient combustion strategies over the years. However, with the emergence of new fuels and combustion modes, it is necessary to improve the computational models. In this research, improved NOx and soot models are developed which uses...

The effort of many manufacturers of heat sources is to achieve the maximum efficiency of energy transformation chemically bound in the fuel to heat. Therefore, it is necessary to streamline the combustion process and minimize the formation of emission during combustion. The paper presents an analysis of the combustion air temperature to the heat performance and emission parameters of burning bi...