A novel cobalt-free Cu1.2Mn1.8O4 spinel coating is prepared and evaluated for the metal interconnect of solid oxide fuel cell. Mn-35Cu and Co-35Mn alloy coatings are deposited on 430 SS substrate and then in-situ oxidized in air at 750 ◦C for 100 h. XRD results confirm that Cu1.2Mn1.8O4 spinel with some Mn2O3 is formed, and the average thickness of the coating is 70–80 μm according to cross sec...

A spinel LiMn1.5Ni0.5O4 (LMNO) cathode material synthesized by a sol-gel method is modified by MgF2 nano-coating via a wet coating strategy. The results of X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM) showed that the MgF2 nano-coating layers do not physically change the bulk structur...

Effect of glazing with an ultraviolet light-activated coating material on reduction of the leaching of methyl methacrylate and formaldehyde from denture acrylic resins was quantitatively evaluated. Disks prepared from auto-polymerized resins were painted with the material and radiated with ultraviolet light. The disks were immersed in artificial saliva and the concentrations of methyl methacryl...

The deposition of mineral debris in the turbine sections of various jet engines occurred after operation on Middle-East routes. Plasma sprayed Zr02-Yn03 thermal barrier coatings were aged with sand samples from several Middle-East locations at temperatures of 1200 to 1500 OC. At temperatures above 1400 OC, the molten sand formed glassy silicate debris that penetrated the ceramic coating complet...

This work introduces Li−La−Ti−O (LLTO), which is a fast lithium-ion conductor, as an effective coating material for cathode materials used in rechargeable lithium-ion batteries. This fast Li-ion conductor is characterized by first-principles calculations showing low activation barrier for lithium diffusion at various different lithium concentrations. The morphology and the microstructure of the...

In this paper a functional graded material (FGM) thermal barrier coating (TBC) is prepared using Atmospheric Plasma Spraying (APS) method. The FGM layers were deposited by varying the feeding ratio of CYSZ/NiCrAlY and conventional CYSZ on a NiCrALY-coated Inconel 738 substrates. Hot corrosion behavior, bonding strength and the related failure mechanisms of a conventional TBC and a FGM TBC are i...

Scanning electron microscopy (SEM) has become a crucial tool to visualize the exterior morphology and surface structures for samples in both biology and material science. Conventional SEMs are usually limited by relative low resolution and charging effects. Carbon or metal coating is required for insulator samples to minimize charging effects. However, the coating layer can sometimes obscure mi...