The adsorption properties of CO and H2 on iron-based catalyst with addition of Zr and Ni were investigated using temperature programmed desorption process. It was found that on the carburized iron-based catalysts, molecular state and dissociative state CO existed together. The addition of Zr was preferential for the molecular state adsorption of CO on iron-based catalyst and the presence of Ni ...

In industrial scale of Gas to Liquid (GTL) process in Fischer-Tropsch (FT) synthesis, a part of reactor outlet gases such as CO2 and CH4 as side reaction products, is usually recycled. In this study, the influence of CO2 and CH4 on the performance and selectivity of Co-Ru/Al2O3 catalyst is investigated by injection of these gases (0-20 vol. % of feed) to the feed stream. The effect of temperatu...

The oxidative carbonylation of methane to acetic acid was investigated using Pt(II) cations as the catalyst and sulfuric acid as the solvent. The eactions were carried out at 180 ◦C in a sealed batch reactor containing either fuming or concentrated (96 wt%) sulfuric acid (3 ml) and PtCl2 20 mM) in the liquid-phase, and pressurized with CH (400 psi) and CO (400 psi). In the absence of CO, the on...

Replacement of precious noble metal catalysts with low-cost, non-noble heterogeneous catalysts for chemoselective reduction and reductive coupling of nitro compounds holds tremendous promise for the clean synthesis of nitrogen-containing chemicals. We report a robust cobalt-nitrogen/carbon (Co-N x /C-800-AT) catalyst for the reduction and reductive coupling of nitro compounds into amines and th...

The use of metal co-catalysts broadens the application of photocatalytic reduction without the use of dihydrogen (H2) gas. We examined photocatalytic hydrogenation of furan, a representative heterocyclic compound and a compound derived from biomass, in alcoholic suspensions of metal-loaded titanium(iv) oxide (TiO2) under a H2-free condition and we found that furan was almost quantitatively hydr...

Here, we have synthesized vertically aligned carbon nanotubes (VA-CNTs), using chemical vapor deposition (CVD) method. Cobalt and ethanol are used as the catalyst and the carbon source, respectively. The effects of ethanol flow rate, thickness of Co catalyst film, and growth time on the properties of the carbon nanotube growth are investigated. The results show that the flow rate of ethanol and...

High yield of H2 of high purity from acetic acid, a model compound of bio-oil from the biomass fast pyrolysis, was produced by sorption enhanced steam reforming (SESR). An oxygen carrier was introduced into a chemical loop (CL) coupled to the cyclical SESR process to supply heat in situ for the endothermic sorbent regeneration, in order to increase the energy efficiency of the process. A new mu...

A very efficient electrogenerated Fe(0) porphyrin catalyst was obtained by substituting in tetraphenylporphyrin two of the opposite phenyl rings by ortho-, ortho'-phenol groups while the other two are perfluorinated. It proves to be an excellent catalyst of the CO2-to-CO conversion as to selectivity (the CO faradaic yield is nearly quantitative), overpotential, and turnover frequency. Benchmark...

Industrial hydrogen production through methane steam reforming exceeds 50 million tons annually and accounts for 2-5% of global energy consumption. The hydrogen product, even after processing by the water-gas shift, still typically contains ∼1% CO, which must be removed for many applications. Methanation (CO + 3H2 → CH4 + H2O) is an effective solution to this problem, but consumes 5-15% of the ...

This study describes the photochemical deposition of Co-based oxygen evolution catalysts on a semiconductor photoanode for use in solar oxygen evolution. In the photodeposition process, electron-hole pairs are generated in a semiconductor upon illumination and the photogenerated holes are used to oxidize Co(2+) ions to Co(3+) ions, resulting in the precipitation of Co(3+)-based catalysts on the...