CO-selective metals (e.g., Ag) on Cu catalysts improve the selectivity of multi-carbon (C 2+ ) products in electrochemical CO 2 reduction. However, origin improvement remains unclear due to convolution tandem and interface effects. Here, Ag@C@Cu core-shell were synthesized, which thin carbon interlayer inhibited direct interaction between Ag while still allowing reduction Ag, thus isolating eff...

A novel nanowire-structured polypyrrole-cobalt composite, PPy-CTAB-Co, is successfully synthesized with a surfactant of cetyltrimethylammounium bromide (CTAB). As an electro-catalyst towards oxygen reduction reaction (ORR) in alkaline media, this PPy-CTAB-Co demonstrates a superior ORR performance when compared to that of granular PPy-Co catalyst and also a much better durability than the comme...

Atomic layer deposition (ALD) was used to prepare a thin alumina on Fischer–Tropsch catalysts. Co-Pt-Si/γ-Al2O3 catalyst overcoated with 15–40 cycles of Al2O3 deposited from trimethylaluminum (TMA) and water vapor, followed by thermal annealing. The resulting tailored 35 cycle ALD overcoating had increased activity compared unmodified catalyst. increase in achieved without significant loss sele...

Here, metal nanoparticles were synthesized by chemical reduction of the corresponding metal salts in the presence of chitosan polymer. Binary and ternary metallic-chitosan Pt-Fe-CH, Pt-Co-CH and Pt-Fe-Co-CH nanocomposites were prepared. Transmission electron microscopy images and UV–Vis spectra of the nanocomposites confirmed the presence of the metal nanoparticles. The electrocatalytic activit...

Modification of conventional Pt/C electrocatalyst with silicomolybdic acid (SiMoA) was performed using electrochemical cyclic voltammetry method. The modified and unmodified catalysts were tested under identical conditions for electrooxidation of CO, methanol, and ethanol. In the CO-stripping experiments, the modified catalyst was characterized by significant shifts (80 and 60 mV) to lower onse...

Aiming at model systems with close-to-realistic transport properties, we have prepared and studied planar Au/TiO(2) thin-film model catalysts consisting of a thin mesoporous TiO(2) film of 200-400 nm thickness with Au nanoparticles, with a mean particle size of ~2 nm diameter, homogeneously distributed therein. The systems were prepared by spin-coating of a mesoporous TiO(2) film from solutions...

A novel generic method of silica supported catalyst system generation from a fluid state is presented. The technique is based on the combined flow and radiation (such as microwave, thermal or UV) induced co-assembly of the support and catalyst precursors forming nano-reactors, followed by catalyst precursor decomposition. The transformation from the precursor to supported catalyst oxide state c...

an extensive study of higher alcohol synthesis (has) from synthesis gas using cobalt (co) promoted alkalized mos2 catalysts supported on carbon nanotubes (cnts) is reported. up to  5wt.% of co is added to the 15wt.% mo-wt.%k/ cnts by incipient wetness impregnation method. most of the metal particles were homogeneously distributed inside the tubes and the rest on the outer surface of the cnts. t...

A new method for catalyst deposition on the inner walls of capillary microreactors is proposed which allows exact control of the coating thickness, pore size of the support, metal particle size, and metal loading. The wall-coated microreactors have been tested in a selective hydrogenation reaction. Activity and selectivity reach values close to those obtained with a homogeneous Pd catalyst. The...

This paper presents the synthesis and characterization of monometallic and bimetallic cobalt and iron nanoparticles supported on alumina. The catalysts were prepared by a wet impregnation method. Samples were characterized using temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), CO-chemisorption, transmission electron microscopy (TEM), field emission scanning electr...