A new CMOS active mixer topology can operate at 1 V supply voltage by use of SCM (switched currentmirror). Such current-mode mixer requires less voltage headroom with good linearization. Mixing is achieved with four improved current mirrors, which are alternatively activated. For ideal switching, the operation is equivalent to a conventional active mixer. This paper analyzes the performance of ...

In this paper, low voltage high gain up-conversion mixer, designed in 90nm CMOS technology, is proposed to work in the frequency band of 2.4 GHz. Current bleeding technique and current mirror topology are used in the upconversion mixer. Conversion Of an input of 100 MHz Given as intermediate frequency signal to an output of 2.4 GHz radio frequency signal is done by the proposed mixer with a loc...

We present a continuous-flow active micromixer based on channel-wall deflection in a polydimethylsiloxane (PDMS) chip for volume flows in the range up to 2 μL s −1 which is intended as a novel unit operation for the microfluidic Braille pin actuated platform. The chip design comprises a main microchannel connected to a series of side channels with dead ends aligned on the Braille pins. Computer...

Turbulent mixing can damage the material molecules because of turbulence. Whereas laminar raises a problem when is carried out on viscous liquids. The mechanism using chaotic flow affects quality. aim experiment was to determine position and direction double stirrer mixer. installation mixer uses cylindrical tub two different mixers consisting primary (Pp) secondary (Ps). Periodically rotate co...

The scaling of the CMOS technologies has a great impact on analog design. The most severe consequence is a reduction of the voltage supply. In this article, a new low-voltage folded-switching mixer with current-reuse, which operates at 1 V supply voltage, is discussed. The main advantages of the introduced mixer topology are: a high voltage gain, a low noise figure, an operation at low supply v...

We have applied an optimization method in conjunction with numerical simulations to minimize the mixing time of a microfluidic mixer developed for protein folding studies. The optimization method uses a semideterministic algorithm to find the global minimum of the mixing time by varying the mixer geometry and flow conditions. We describe the minimization problem and constraints and give a brief...

We describe a design for a sideband-separating balanced mixer using four planar single-ended mixer chips connected to the feed horn and LO source by a network of quadrature waveguide hybrids and an in-phase waveguide power divider. The mixer has separate IF output ports for the downconverted signals from the upper and lower RF sidebands, and requires ~14 dB less LO power than a single-ended mix...

We report on the design and performance of a 530-GHz balanced SIS mixer, the first balanced mixer in this frequency range. This quasi-optical balanced mixer utilizes a cross-slot antenna on a hyperhemispherical substrate lens with eight superconductor–insulator–superconductor (SIS) junctions and a 180 lumped element IF hybrid circuit. The local oscillator (LO) and the radio frequency (RF) signa...

The mapping approach is applied to study the distributive mixing in the, widely industrially used, Kenics static mixer. The flexibility of the mapping method makes it possible to study and compare thousands of different mixer layouts and perform optimization with respect to macroscopic homogenization efficiency and interface generation. In the paper two different designs of the mixer are invest...

The problem of separating Java code and HTML code in Servlet programming is not yet completely solved since the existing tentative solutions either are too complex or not complete. We present Mixer which is a novel helper tool based on a template engine design philosophy to solve this problem. Mixer is easy to learn and to use. Mixer is also computationally very efficient. We have already teste...