. AbstrAct Objective. In clinical practice, core material can be exposed after adjustments, which may result in loss of ceramic glaze. The objective of this study is to evaluate the effect of surface roughness on the flexural strength and fracture toughness of In-Ceram zirconia core material. Materials and methods. Forty In-Ceram zirconia specimens were prepared and divided into two main groups...

Porous alumina films had been fabricated by anodizing from aluminum films after an electropolishing procedure. Alumina stripes without pores can be distinguished on the surface of the porous alumina films. The width of the alumina stripes increases proportionally with the anodizing voltage. And the pores tend to be initiated close to the alumina stripes. These phenomena can be ascribed to the e...

The purpose of this study was to assess the clinical performance of bonded composite (Excite/Tetric Ceram - Vivadent) versus a resin-modified glass ionomer cement (Vitremer - 3M) for restoring non-carious cervical lesions. A total of 70 restorations (thirty-five per material) were placed in 30 patients, 18-50 aged, by one operator. Rubber dam was employed in all cases, lesions were pumiced, ena...

References ‘C. T. Moynihan, N. S . Saad, D. C. Tran, and A. V. Lesikar, “Mixed-Alkali Effect in the Dilute Foreign-Alkali Region, Failure of the StrongElectrolyte/Cationic Interaction Model,” J . Am. Ceram. Soc., 63 [7-81 458-64 (1980). 2 J . W. Fleming, Jr., and D. E. Day, “Relation of Alkali Mobility and Mechanical Relaxation in Mixed Alkali Glasses,” ibid. , 55 [4] 18692 (1972). 3G. Tomandl ...

Alumina is one of the most widely used adsorbent for removal of dissolved pollutants from waste water. Various chemical species, especially ions, are known to be adsorbed onto alumina. On the other hand, alumina is a typical support for catalysts. Many kinds of metal supported catalysts are prepared using alumina as their support. These two roles of alumina, i.e., as adsorbent and support, are ...

Alumina nanofibers were prepared by a technique that combined the sol-gel and electrospinning methods. The solution to be electrospun was prepared by mixing aluminum isopropoxide (AIP) in ethanol, which was then refluxed in the presence of an acid catalyst and polyvinylpyrolidone (PVP) in ethanol. The characterization results showed that alumina nanofibers with diameters in the range of 102 to ...

The control of particle size distribution of fabricated alumina nanoparticles from general alumina that has a large geometric standard deviation (GSD) is studied. A thermophoretic separator was used to control the GSD of the fabricated alumina nanoparticles. Unevaporated particles and primary particles were separated to yield a small GSD for fabricated alumina nanoparticles. The fabricated alum...

Alumina nanorods were prepared from chromium-containing alumina sludge, and the effects of doping elements, such as Cr, Fe, and Mg, were researched. The results show that the crystal transformation of alumina is restricted by the doped Cr and facilitated by the doped Fe and Mg, which is transformed from θ-Al2O3 to α-Al2O3 in the calcination process. Meanwhile, the crystal transformation of alum...