Alumina-based nanocomposites reinforced with niobium and/or carbon nanotubes (CNT) were fabricated by advanced powder processing techniques and consolidated by spark plasma sintering. Raman spectroscopy revealed that single-walled carbon nanotubes (SWCNT) begin to break down at sintering temperatures >1150 C. Nuclear magnetic resonance showed that, although thermodynamically unlikely, no Al4C3 ...

Abstract The high-temperature corrosion of turbine blades poses a serious threat to the efficiency electrical gas power stations, which results in heavy economic losses. In present study, Inconel 738 low-carbon steel utilized was coated on alumina (Al 2 O 3 ) variety percentages carbon nanotubes (4, 6, and 8 wt%) using plasma spray technique. behavior 738LC alloy with without artificial ash (67...

This paper reports on the synthesis and characterisation of polysulfone (PSf) ultrafltration (UF) membranes modifed with carbon coated alumina Ni-doped titanium dioxide (CCA/Ni-TiO2) nanoparticles. The syntheses of the membranes was carried out using the phase inversion process. The ...

Thin films of ceramic materials like alumina and silicon carbide are deposited on Inconel substrate by pulsed laser deposition technique using Q-switched Nd: YAG laser. Deposited films are characterized using UV-visible spectrophotometry and X-ray diffraction. Composite microhardness of ceramic coated Inconel system is measured using Knoop indenter and its film hardness is separated using a mat...

Thermal barrier coatings (TBCs) are used in gas turbine engines to protect engine hot-section components in the harsh combustion environments, and extend component lifetimes. Infrared Thermography method has been selected for obtaining thermal images and studying the TBCs of Alumina, Zirconia and Alumina+Titanium oxide coated on the base plate of Titanium, by measuring the back wall temperature...

A high fidelity interferometric transducer is designed based on platinum-coated nanoporous alumina films. The ultrathin metal coating significantly improves fidelity of the interferometric fringe patterns in aqueous solution and increases the signal-to-noise ratio. The performance of this transducer is tested with respect to refractive index unit (RIU) sensitivity measured as a change in effect...

The paper relates to a catalyst, comprising copperchromium spinel, coated on carrier γ-Al2O3. The effect of preparation conditions on the active component composition and activity behavior of the catalysts is discussed. It was found that the activity of carbon monoxide, DME, formaldehyde and methanol oxidation reaches a maximum at an active component content of 20 – 30 wt. %. Temperature calcin...

Catalyst layers (4-20 microm) of rhodium (1 wt%) supported on alumina, titania, and ceria-zirconia (Ce(0.5)Zr(0.5)O(2)) were coated on stainless-steel corrugated sheets by dip-coating in very stable colloidal dispersions of nanoparticles in water. Catalytic performances were studied for low-temperature (< or = 500 degrees C) steam reforming of propane at a steam to carbon ratio equal to 3 and l...

Well-aligned, open-ended carbon nanotubes (CNTs), free of catalyst and other carbon products, were synthesized inside the pores of an anodic aluminium oxide (AO) template without using any metallic catalyst. The CNTs and the CNT/AO composites were characterized by scanning and transmission electron microscopy, thermogravimetric analysis, Raman spectroscopy and X-ray diffraction. Particular care...

The synthesis of materials with tailored properties is one of the most active areas of material science [1, 2]. Among so many materials, γ-alumina due to the significant application in catalysis, electronic and ceramic industry has been studied extensively [3]. Various processes have been employed for the preparation of high quality alumina, including sol-gel processing from aluminum alkoxides....