The use of surface modified, biocompatible tubing in cardiopulmonary bypass has been reported to decrease the inflammatory responses caused by blood contact with the non endothelial surface of poly vinyl chloride (PVC) tubing. The combination of advances in biocompatible tubing and increased affordability resulted in a change to our cardiopulmonary bypass circuit, with the Terumo Capiox SX25 ox...

____________ _ Pump head tubing was studied to determine if internal wear occurred during routine cardiopulmonary bypass. Several segments of silicone rubber tubing were examined in a scanning electron microscope following clinical perfusion. In each case, the proper degree of occlusion had been set just prior to beginning bypass. The roller pump was a six-inch dual roller type, and the tubing ...

endonasal endoscopic laser-assisted dacryocystorhinostomy has many advantages over conventional external dacryocystorhinostomy. this technique avoids a cutaneous scar and causes less surgical trauma and bleeding than that seen in conventional lacrimal surgery. a total of 20 endoscopic laser-assisted dacryocystorhinostomy in 16 patients were performed between 1998 and 1999. the procedure was suc...

INTRODUCTION Although a number of factors affect maple sap flow in vacuum tubing systems, it has become increasingly apparent that sap yields are largely a function of two major influences: vacuum level at the taphole and taphole and tubing sanitation. Vacuum controls sap yield by heightening the pressure differential between the inside of the tree and the inside of the tubing system, therefore...

We have developed electroosmotic pumps (EOPs) fabricated from 15-nm-thick porous nanocrystalline silicon (pnc-Si) membranes. Ultrathin pnc-Si membranes enable high electroosmotic flow per unit voltage. We demonstrate that electroosmosis theory compares well with the observed pnc-Si flow rates. We attribute the high flow rates to high electrical fields present across the 15-nm span of the membra...

Monodisperse and size-controlled polymer particles were produced without surfactant or washcoat from O/W monomer emulsions and “on the fly” polymerization under UV irradiation in a very simple needle/tubing system. The effect of the viscosity of the continuous phase on the size of final particles was investigated. The capillary number ratio was found to be relevant to predict the size of the dr...

We experimentally study the formation and evolution of threads containing more viscous liquids surrounded by less viscous, immiscible liquids through hydrodynamic focusing in square microchannels. Over a large range of viscosities and interfacial tensions, five characteristic regimes of flow behavior are identified: threading, jetting, dripping, tubing, and displacement. We locate the boundarie...

Several types of silicon fluidic coupler have been designed, fabricated, and tested to facilitate external connections to MEMS (microelectromechanical systems) fluidic devices. By using both bulk micromachining and DRIE (deep reactive ion-etching) techniques, couplers of different geometry have been produced for use with any standard MEMS fluidic port. In addition, couplers are easily modified ...