Lecturer, Department Of Electrical Engineering, L. E. College Morbi-363642, India, ---------------------------------------------------------------------***--------------------------------------------------------------------Abstract -This paper presents application of flying capacitor multi level inverter in high voltage shunt active power filter. The proposed strategy uses three independent mul...

A dynamic hysteresis control of the buck converter for achieving high slew-rate response to disturbances is proposed. The hysteresis band is derived from the output capacitor current that predicts the output voltage magnitude after a hypothesized switching action. Four switching criteria are formulated to dictate the state of the main switch. The output voltage can revert to the steady state in...

A novel multi-reference capacitor switching scheme for ultralow power successive approximation register (SAR) ADCs is proposed. By using 5 references, the proposed switching scheme only dissipates 10.6 CVREF average energy and requires 256 unit capacitors, which are reduced by 99.2% and 87.5%, compared to the conventional structure. Besides, the common-mode voltage of the comparator input is ap...

In this paper a zero voltage switched active network (Fig. 1) which can be used in conjunction with single-phase or three-phase ac to dc diode rectifiers is presented. It is shown that application of the proposed switching network in threephase ac to dc boost converter yields zero switching losses while maintaining a unity input power factor. Active network capacitor, Cs, diodes D7, and D8, mai...

This paper presents analytical models for studying the transient behavior of several power harvesting circuit topologies for use with piezoelectric bending transducers. Specifically, the problem of charging a large storage capacitor, which is inherently a time-varying process, is considered. Three circuit designs are studied—direct charging, synchronized switching and discharging to a storage c...

The series capacitor buck converter is a dc-dc converter topology that uniquely merges a switched capacitor circuit and a multiphase buck converter. Many of the challenges faced by conventional buck converters are overcome by this converter topology. This enables efficient, high frequency operation and significantly smaller solution size. The series capacitor buck converter has beneficial chara...

In this paper, an overview of recent advances in digital control of lowto medium-power dc-dc switching converters is presented. Traditionally, analog electronics methods have dominated in controlling such dc-dc converters. However, with the steadily decreasing cost of ICs, the feasibility of digitally controlled dc-dc switching converters has increased significantly. This paper outlines a sampl...

A boost Power Factor Correction (PFC) front end converter followed by a circulating current for the soft switching flows only through the auxiliary circuit and a In recent years, dc power supplies have been widely used in industrial Lr is delivered to the capacitor C1 via transformer T. iLr (t) decreases linearly. I believe that I understand how a starting capacitor is used with an induction mo...

this brief introduces a method of improving the power conversion efficiency of a dc-dc boost converter with passive snubber circuit. This method uses a passive snubber circuit which consists of two inductors, a capacitor, and a diode, to reduce switching loss. The use of passive soft switching methods has been emphasized as better alternative to active methods mainly because they do not require...