This paper presents an inkjet printing capacitive microwave sensor for toxic vapor detection. The designed sensors were presented and fabricated with success. The experiments show sensitivity to ethanol vapor according to the S parameters. It is equal to 0.9 kHz/ppm and 1.3 kHz/ppm for the sensors based on 5 and 50 sensitive layers respectively. This sensor will be integrated into real-time mul...

Corn moisture content is the main factor of effecting corn safe transportation and storage, and is also an indispensable measurement part when it is used to feed, food and industry. Due to large particle size, corn will produce large gap during measuring moisture content. Because air has much influence on dielectric constant of the device, moisture content is not precision. In all kinds of corn...

This paper presents the design of a high-performance dualband wireless capacitive pressure sensor operating in harsh environment. The proposed design is composed of an absolute capacitive pressure sensor, pressure controlled oscillator (PCO), class-E power amplifier (PA) and an antenna. The sensor node collects and transmits the pressure variation in the term of frequency output wirelessly to a...

(1247) A 70°Phase Margin Differential OPAMP with Positive Feedback in Flexible a-IGZO TFT Technology Authors: (1306) Flexible PVDF Ferroelectric Capacitive Temperature Sensor (1898) Biomedical Sensor Interface for PLI Cancellation (1967) A Driver Circuit based on the emerging GaN-on-CMOS Process. Controller and Differential Sensing Circuit. Sang Hyuck Bae A fully differential circuit was design...

In this paper, a MEMS based capacitive nasal sensor system for measuring Respiration Rate (RR) of human being is developed. At first two identical diaphragm based MEMS capacitive nasal sensors are designed and virtually fabricated. A proposed schematic of the system consists of signal conditioning circuitry alongwith the sensors is described here. In order to measure the respiration rate the se...

Activity recognition with a wearable accelerometer is a common investigated research topic and enables the detection of basic activities like sitting, walking or standing. Recent work in this area adds different sensing modalities to the inertial data to collect more information of the user’s environment to boost activity recognition for more challenging activities. This work presents a sensor ...

This paper describes an innovative sensor system which can detect and track people in a room by means of an array of capacitive sensors beneath the floor covering. By combining cutting-edge technology from the domains of capacitive sensing, wireless data transmission, interconnecting technology between textiles and microelectronics and high level data processing it is possible to support variou...

The study investigates a capacitive micro pressure sensor integrated with a ring oscillator circuit on a chip. The integrated capacitive pressure sensor is fabricated using the commercial CMOS (complementary metal oxide semiconductor) process and a post-process. The ring oscillator is employed to convert the capacitance of the pressure sensor into the frequency output. The pressure sensor consi...

The effect of the humidity of the surrounding atmosphere on the characteristics of capacitive structures is a known problem for capacitive gas-pressure sensors. However, the use of a differential mode of operation can provide a good solution – only the manufacturing of the ceramic structures with the appropriate pairs of capacitive sensing elements remains a major challenge. In order to find a ...

This study presented a wireless smart contact lens system that was composed of a reconfigurable capacitive sensor interface circuitry and wirelessly powered radio-frequency identification (RFID) addressable system for sensor control and data communication. In order to improve compliance and reduce user discomfort, a capacitive sensor was embedded on a soft contact lens of 200 μm thickness using...