Dynamic modulus characterizes the viscoelastic behavior of asphalt materials and is the most important input parameter for design and rehabilitation of flexible pavements using Mechanistic–Empirical Pavement Design Guide (MEPDG). Laboratory determination of dynamic modulus is very expensive and time consuming. To overcome this challenge, several predictive models were developed to determine dyn...

pavement permanent deformations due to lack of shear strength in mixture are a major reason of rutting. any simple test to determine mixtures resistance to permanent deformation isn’t distinguished in the 1st level of superpave mix design method and prevalent methods for evaluating mixture rut resistance are expensive and time-consuming. two aggregate types, gradations, asphalt cements and fill...

The performance of asphaltic pavements during their service life is highly dependent on the mechanical properties of the asphaltic layers. Therefore, in order to extend their service life, scientists and engineers are constantly trying to improve the mechanical properties of the asphaltic mixtures. One common method of improving the performance of asphaltic mixtures is using different types of ...

It is well known that the performance of hot mix asphalt (HMA) in service life is closely related to a proper aggregate gradation. A laboratory study was conducted to investigate the effects of nominal maximum aggregate size (NMAS) on the performance of stone matrix asphalt (SMA). The volumetric characteristics and performance properties obtained from wheel tracking tests, permeability test, be...

This study was conducted in order to evaluate the effects of long term ageing on toughness and resilient modulus of asphalt concrete mixtures containing Electric Arc and Basic Oxygen Furnace steel slags. After initial evaluation of the properties of steel slags using X-ray Diffraction and Scanning Electric Microscope, eleven sets of laboratory mixtures were prepared. Each set was treated replac...

Warm Mix Asphalt (WMA), manufactured at a lower temperature than the traditional Hot Mix Asphalt (HMA), allows for important economic and environmental benefits when considered for application in roads. Nonetheless, despite the benefits, its application in pavement for roads is not as widespread as desired from an environmental point of view; more in-depth studies to investigate its development...

Low-temperature cracking is one of the most common road pavement distress types in Poland. While bitumen performance can be evaluated in detail using bending beam rheometer (BBR) or dynamic shear rheometer (DSR) tests, none of the normalized test methods gives a comprehensive representation of low-temperature performance of the asphalt mixtures. This article presents the Bending Beam Creep test...

This study is focused on investigating the effectiveness of low heat accumulation asphalt mixture and its impact on the urban heat environment. Infrared radiation experiments showed that the temperature of the asphalt mixture decreased with the increase in far-infrared radiant material. The results also revealed that, compared to asphalt with 0% far-infrared radiant content, the asphalt materia...

a r t i c l e i n f o Cold recycling technique represents the most environmental friendly solution for pavement rehabilitation nowadays. In fact, this technique allows the use of the highest percentage of reclaimed asphalt avoiding the energy consumption related to aggregates heating required by the traditional hot mix asphalt design. The mix design represents a key phase of the cold mix produc...